Driven clutch machined & Belt Adjusting

drenlin · 02-15-2013, 06:53 PM

After having driven clutch machined and new severe duty belt. I moved motor all the way back and belt is still realy tight and clutch is not all the way closed. I think if motor was farther back belt would ride higher. Has anyone took washers out from behind motor mounts to get motor to slide back more?

lockman1 · 02-15-2013, 07:08 PM

Welcome to BGW drenlin!

Until we get to know you... you might want to add the year and model of your cart!

I'm guessing you got your belt and had your clutch machined at CPP... correct?
if so, have you talked with CPP about it yet? (awesome customer service)

There are 2 slightly different sized belts, and yes, removing the spacers "may" help,
But I'd suggest talking with CPP about it first!

drenlin · 02-15-2013, 10:07 PM

Its a 94 DS the motor has been rebuilt by parts from CP. Bored .10 over timming key and bigger jet in carb. aslo new drive clutch and belt from CP. I had driven clutch machined localy.

Springbok · 02-16-2013, 10:54 AM

The local place that machined your clutch, have they done golf cart clutches before?

02-15-2013, 06:53 PM	#1
drenlin Not Yet Wild Join Date: Apr 2012 Posts: 2	Driven clutch machined & Belt Adjusting After having driven clutch machined and new severe duty belt. I moved motor all the way back and belt is still realy tight and clutch is not all the way closed. I think if motor was farther back belt would ride higher. Has anyone took washers out from behind motor mounts to get motor to slide back more?
drenlin Not Yet Wild Join Date: Apr 2012 Posts: 2

02-15-2013, 07:08 PM	#2
lockman1 What the ....? Join Date: Jan 2007 Location: N.E. Wisconsin Posts: 14,933	Re: Driven clutch machined & Belt Adjusting Welcome to BGW drenlin! Until we get to know you... you might want to add the year and model of your cart! I'm guessing you got your belt and had your clutch machined at CPP... correct? if so, have you talked with CPP about it yet? (awesome customer service) There are 2 slightly different sized belts, and yes, removing the spacers "may" help, But I'd suggest talking with CPP about it first!

02-15-2013, 10:07 PM	#3
drenlin Not Yet Wild Join Date: Apr 2012 Posts: 2	Re: Driven clutch machined & Belt Adjusting Its a 94 DS the motor has been rebuilt by parts from CP. Bored .10 over timming key and bigger jet in carb. aslo new drive clutch and belt from CP. I had driven clutch machined localy.
drenlin Not Yet Wild Join Date: Apr 2012 Posts: 2

02-16-2013, 10:54 AM	#4
Springbok Photoshop Guy Join Date: Aug 2012 Location: Canal Fulton, OH Posts: 3,846	Re: Driven clutch machined & Belt Adjusting The local place that machined your clutch, have they done golf cart clutches before?

Similar Threads
Thread	Forum
G2 belt slipping in driven clutch	Gas Yamaha
machined driven clutch	Gas EZGO
87 gas ezgo belt comes off driven clutch	Gas EZGO
driven clutch and belt strength?	Big Block Talk!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum