![]() |
|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Gone Wild
![]() Join Date: Mar 2013
Posts: 319
|
![]() So my kids ripped out the wires from my charging end on the Accusense charger. I bought a new charging end and there are three wires....
Red Black White There are two taller post and a smaller post in the package? Can I assume Red is + and Black is -, while white is Ground? |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
![]() Join Date: Mar 2013
Posts: 319
|
![]() Any luck
|
![]() |
![]() |
![]() |
#3 |
Gone Wild
![]() ![]() Join Date: Dec 2009
Location: Aiken, SC
Posts: 14,559
|
![]() I would pull the charger cover and validate but my ezgo .. White was pack +, Black pack - and mine didn’t have a red wire but would think trigger.
|
![]() |
![]() |
![]() |
#4 |
Gone Wild
![]() Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,843
|
![]() Getting it wrong could do a lot of damage. I would contact Accusense if you are unsure how to reconnect the wires.
|
![]() |
![]() |
![]() |
#5 |
Gone Wild
![]() Join Date: Mar 2013
Posts: 319
|
![]() I ended contacting Accusense. In case this is a question later, white is positive, black is negative, and red is ground
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
DPI Accusense Gen 4 Charger | Golf Carts and Parts | |||
Accusense charger and Yamaha G29 | Electric Yamaha | |||
Accusense charger and Yamaha G29 | Electric Yamaha | |||
DPi Accusense Charger Yamaha Drive | Golf Carts and Parts | |||
Dpi accusense charger for cc | Golf Carts and Parts |