|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-31-2018, 06:46 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2018
Posts: 5
|
2009 ezgo rxv will not move.
My 2009 ezgo rxv will not move. I made the rookie mistake of messing with the soc meter wires. I’ve read many post on here after my costly mistake I realized that I had probably destroyed my controller. I ended up doing the danaher to Curtis conversion and now not only will my cart still not run it will not move while in tow with the key on. The only way I can get the cart to move is by releasing the brake manually with the lever on the motor. Any ideas?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-31-2018, 07:15 PM
|
#2 |
|
Gone Wild
 Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,232
|
Re: 2009 ezgo rxv will not move.
First check fuses under the controller cover.
|
|
|
|
|
07-31-2018, 07:47 PM
|
#3 |
|
Not Yet Wild
Join Date: Jul 2018
Posts: 5
|
Re: 2009 ezgo rxv will not move.
I have checked the fuse that is on the controller cover it was good.
|
|
|
|
|
07-31-2018, 08:27 PM
|
#4 |
|
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,232
|
Re: 2009 ezgo rxv will not move.
You probably took out some or all the 5v sensors.
|
|
|
|
|
07-31-2018, 08:31 PM
|
#5 |
|
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,232
|
Re: 2009 ezgo rxv will not move.
The Curtis handheld would come in very handy at the moment.
|
|
|
|
|
08-01-2018, 02:12 AM
|
#6 | |
|
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: 2009 ezgo rxv will not move.
Quote:
|
|
|
|
|
|
08-01-2018, 04:56 AM
|
#7 |
|
Not Yet Wild
Join Date: Jul 2018
Posts: 5
|
Re: 2009 ezgo rxv will not move.
St Louis Missouri
|
|
|
|
|
08-01-2018, 07:50 AM
|
#8 |
|
Gone Wild
Join Date: Mar 2018
Location: Oklahoma
Posts: 254
|
2009 ezgo rxv will not move.
Rugby. I have a hand held and live outside of JOPLIN. I also have family in St. Louis. Sounds like it's time for a road trip
Sent from my iPad using Tapatalk |
|
|
|
|
08-01-2018, 08:21 AM
|
#9 | |
|
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: 2009 ezgo rxv will not move.
Quote:
 |
|
|
|
|
|
08-01-2018, 09:26 AM
|
#10 |
|
Not Yet Wild
Join Date: Jul 2018
Posts: 5
|
Re: 2009 ezgo rxv will not move.
Jkredman that would be fantastic. If you make it up this way let me know and we can meet up. Bob I just seen another post where you said any Curtis controller after a 5201 will not work unless you do the harness conversion that you have documented. The controller conversion kit I got is a 1206ac-5213. So I’m guessing I should do the full harness conversion before I waste jk’s Time?
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2009 Ezgo RXV wont move. | Electric EZGO | |||
| 2009 EZGO RXV won’t move. HELP!!! | Electric EZGO | |||
| 2009 ezgo txt will not move | Electric EZGO | |||
| 2009 RXV will not move | Electric EZGO | |||
| 2009 ds does not move right | Electric Club Car | |||
Linear Mode
