|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-16-2018, 06:37 PM | #11 |
Not Yet Wild
Join Date: Feb 2014
Posts: 64
|
Re: EZGO DCS no activation at the solinoid
I will explain the best I can so be patient with me. Lol
Ok I peeled back the cover on the main harness from up by the Solenoid heading towards the F/R switch plugs. Just before the first plug (Reverse side) I found a broken connection. Following the wires the red wire is taped together with the orange with red stripe wire at the bad connection. I’m gonna butt connect them I just need to know which wire goes to what? Out of the plug I have 2 orange w red stripes but the other 2 wires are one is red and the other is orange with the red stripe. Does it matter which orange/white wire red goes to? The other connection will be orange w stripe to orange w stripe. Hope this kinda makes sense. Lol |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-16-2018, 06:49 PM | #12 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EZGO DCS no activation at the solinoid
Sounds like a previous owner has been messing around inside the wiring harness, so I would trust the color coding of any of the wires in the bundle at this point.
Go back to the diagram I attached to post#5 with Pin-9 path highlighted and physically trace the wires from point to point. |
08-16-2018, 07:51 PM | #13 |
Not Yet Wild
Join Date: Feb 2014
Posts: 64
|
Re: EZGO DCS no activation at the solinoid
Let me try to explain what’s going on. I followed the main harness off of th solenoid back towards the F/R switch. After finally getting in insulation cover off the harness I found the broken red and orange wire just before the plug at the reverse side. Inside the harness was the red and orange/red stripe. After cleaning them up and a closer look I realized there was 2 orange/red stripes on plug side and a red and orange/red stripe on other side. When butt connecting them which wire goes where? I have 1 red and 3 orange/red stripes. Does it matter?
|
08-16-2018, 07:52 PM | #14 |
Not Yet Wild
Join Date: Feb 2014
Posts: 64
|
Re: EZGO DCS no activation at the solinoid
Sorry JohnnyB. I didn’t realize my message came through.
|
08-16-2018, 07:58 PM | #15 |
Not Yet Wild
Join Date: Feb 2014
Posts: 64
|
Re: EZGO DCS no activation at the solinoid
I don’t think anyone has been inside that harness. It has the wirebraid as it took me an hour to get as far as I did just getting it off without damaging the wires any further. Looked like corrosion on each end of the wires. I will study the diagram further just didn’t see where the red spliced into orange/red but that’s what I have. 3 oranger 1 red so the red has to join to a oranger wire. Just which one.
|
08-17-2018, 09:09 AM | #16 |
Not Yet Wild
Join Date: Feb 2014
Posts: 64
|
Re: EZGO DCS no activation at the solinoid
I am thinking that 2 wires should be tied together into one connector.
Thoughts? Thanks again. This has been a pain finding this broken wire. |
08-17-2018, 09:12 AM | #17 |
Not Yet Wild
Join Date: Feb 2014
Posts: 64
|
Re: EZGO DCS no activation at the solinoid
|
08-17-2018, 09:50 AM | #18 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,140
|
Re: EZGO DCS no activation at the solinoid
Go back and look at the wiring diagram jb posted and you should be able to chase those wires
|
08-17-2018, 09:58 AM | #19 |
Not Yet Wild
Join Date: Feb 2014
Posts: 64
|
Re: EZGO DCS no activation at the solinoid
Thanks KG, I just got done looking at the diagram and believe I have figured it out. Now to see if the solenoid will activate when everything is back together. Thanks for the input
|
08-17-2018, 11:28 AM | #20 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EZGO DCS no activation at the solinoid
I found a better schematic for the later version of the F/R with the plug in microswitches and shows the color code of the wires connected to each.
Hope it's not to late to help. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2006 EZGO TXT - No Solinoid Click | Electric EZGO | |||
Electric EZGO: difficult/delicate drivetrain activation? | Electric EZGO | |||
new solinoid on 1999 ezgo | Electric EZGO | |||
solenoid activation | Electric EZGO | |||
85 EZGO Solinoid Question | Electric EZGO |