Question for the group about new product

Theflyinglineman · 09-03-2018, 08:35 PM

Good evening,
How many people would be interested in adding lights to there glove box. And how much would you be willing to pay for the kit. I built a set for my cart and thought other people might be interested. The kit would include led lights for two glove boxes two switches. The lights would come on when the door was opened and go off when door is closed. For installation all you would have to do is drill 1 hole in the glove box for 2 wires to pass through and then connect the positive and negative wires up to a 12 volt source and mount the LED lights with the pre applied 3m tape. Depending on your dash the led lights will not be visible .
Any thoughts on what people would be wiling to pay for something like this.

Thanks Adam

yurtle · 09-04-2018, 12:24 AM

Also an Adam.

I'd build a motion sensing light, if I were to build one. Would work with or without a door.

Used to install them in industrial panels. I can't remember the last panel I saw with a door switch. The advantage is if you leave the door open, then go back to your bonfire, the thing would time out.

09-03-2018, 08:35 PM	#1
Theflyinglineman Gone Wild Join Date: Oct 2016 Posts: 162	Question for the group about new product Good evening, How many people would be interested in adding lights to there glove box. And how much would you be willing to pay for the kit. I built a set for my cart and thought other people might be interested. The kit would include led lights for two glove boxes two switches. The lights would come on when the door was opened and go off when door is closed. For installation all you would have to do is drill 1 hole in the glove box for 2 wires to pass through and then connect the positive and negative wires up to a 12 volt source and mount the LED lights with the pre applied 3m tape. Depending on your dash the led lights will not be visible . Any thoughts on what people would be wiling to pay for something like this. Thanks Adam

09-04-2018, 12:24 AM	#2
yurtle Gone Mad Join Date: Oct 2009 Location: Buford, GA Posts: 8,988	Re: Question for the group about new product Also an Adam. I'd build a motion sensing light, if I were to build one. Would work with or without a door. Used to install them in industrial panels. I can't remember the last panel I saw with a door switch. The advantage is if you leave the door open, then go back to your bonfire, the thing would time out.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum