|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-05-2018, 10:04 AM | #1 |
Not Yet Wild
Join Date: Apr 2017
Posts: 18
|
1989 EZGo Marathon accelerator switch assembly
I have to replace the Movable contact brush on an 1989 EzGO accelerator board, how do you align the sliding brush with the contacts on the board. I replace the brush assembly back onto the contact arm and there is a stud on one side that the contact arm hits but nothing on other side.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-05-2018, 10:06 AM | #2 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: 1989 EZGo Marathon accelerator switch assembly
The stud should be in the resting position for the wiper arm, and when you press the pedal all the way down the wiper shouldn’t go past the last contact. If it does your pedal needs adjusting underneath.
Club Car DS driver’s club #59 |
|
|
Similar Threads | ||||
Thread | Forum | |||
Accelerator Switch Assembly - Sparking? | Electric EZGO | |||
Accelerator Switch Assembly - Sparking? | Electric EZGO | |||
1992 Marathon Accelerator Micro-Switch | Gas EZGO | |||
Need help with a ezgo accelerator assembly | Electric EZGO | |||
89 marathon Accelerator Switch | Gas EZGO |