|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
10-15-2018, 05:12 PM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2018
Posts: 1
|
Diode and resistor placement on HD solenoid
I'm installing a HD solenoid (Albright SW200) on my 2006 Ezgo Txt 36 volt and have some questions. I'm assuming I need to install the existing resistor (from the old solenoid) on the new solenoid? Or does this solenoid have an internal resistor? I saw a thread mentioning that was possible on some solenoids. Also, I thought I saw a nice diagram of the SW200 showing polarity of the spade connectors to the coil and how to install the diode in the right direction. Thanks in advance!
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-15-2018, 07:01 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Diode and resistor placement on HD solenoid
Does you SW200 have a small + and - sign next to the small terminals?
Does it have a + sign next to one of the big posts? And what cart are you asking about for the install? |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Solenoid Resistor and Diode 36v. | Electric Club Car | |||
| Proper diode placement on solenoid..? | Electric EZGO | |||
| 2000 TXT PDS - Resistor on Solenoid but No Diode | Electric EZGO | |||
| Does my solenoid have to have resistor and diode? | Electric EZGO | |||
| Solenoid resistor and diode help | Electric EZGO | |||
Linear Mode
