|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-19-2018, 02:32 PM | #11 | |
Not Yet Wild
Join Date: Oct 2018
Location: ATHENS Georgia
Posts: 24
|
Re: ALLTRAX 500 XCT EZGO PDS PROBLEM Need Help!
Quote:
2- Yes, but there was a issue with the cart. It ran at first but would drop to a crawl after a period of time. After sitting would repeat the cycle. 3- Yes the red wire with the white stripe coming from the charger port has pack voltage the J1 contact The yellow wire does not have pack voltage on it. From the one line diagram it runs to the J1 plug, I do not know where it receives power from there. |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-19-2018, 03:09 PM | #12 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: ALLTRAX 500 XCT EZGO PDS PROBLEM Need Help!
The diagram shows the red/wht wire as power in to C1 and the yellow wire as power out when power in on foot switch GRN
Is there power in on C1 green when pedal is depressed? |
10-19-2018, 04:16 PM | #13 | |
Not Yet Wild
Join Date: Oct 2018
Location: ATHENS Georgia
Posts: 24
|
Re: ALLTRAX 500 XCT EZGO PDS PROBLEM Need Help!
Quote:
Updates to come... |
|
10-19-2018, 06:03 PM | #14 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: ALLTRAX 500 XCT EZGO PDS PROBLEM Need Help!
Quote:
|
|
10-30-2018, 06:41 PM | #15 |
Not Yet Wild
Join Date: Oct 2018
Location: ATHENS Georgia
Posts: 24
|
Re: ALLTRAX 500 XCT EZGO PDS PROBLEM Need Help!
Update on the progress. Got the new 500 controller back from Alltrax. Installed correctly with the FN2 with the speed cranked all the way up.
-While connected to the computer the Alltrax Toolbox was glitching like it kept restarting. - Turned down the FN2 to the lowest setting that was possible. This stopped the glitch in the toolbox - Controller Flashed green 4 times then solid green. Good to go. - Now the cart is still at a crawl. Cart has pickup off the line but then just at a crawl forward or reverse. -Started messing with the FN2 speed control. When I put the speed all the way to the max solenoid cuts out and cart stops. -Connected back to the computer found that when the FN2 was cranked up the Error Flag shows Shutdown & High Throttle Range. - Called Alltrax and trouble shoot both problems (slow speed & FN2) -FN2 is bad= Send back to Alltrax for replacement -Slow Speed Issue= The speed limit setting in the controller had to be turned off. Now currently without the FN2 (until I get the replacement) Cart runs and drives fast and well. |
10-30-2018, 06:56 PM | #16 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: ALLTRAX 500 XCT EZGO PDS PROBLEM Need Help!
I'm convinced you have a defective motor speed sensor. Replace it and enjoy the rest of the Alltrax abilities.
|
11-04-2018, 08:10 AM | #17 |
Not Yet Wild
Join Date: Oct 2018
Location: ATHENS Georgia
Posts: 24
|
Re: ALLTRAX 500 XCT EZGO PDS PROBLEM Need Help!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Ezgo pds with alltrax dcx 400 controller with reverse problem | Electric EZGO | |||
Alltrax Problem | Electric EZGO | |||
Ezgo series Alltrax SPM 48500 question/problem | Electric EZGO | |||
96 EZGO TXT Series - Alltrax 48500EZ problem | Electric EZGO | |||
Alltrax problem still | Electric EZGO |