|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-29-2018, 11:01 PM | #1 |
Getting Wild
Join Date: Sep 2018
Location: AL
Posts: 85
|
2010 Rxv Gear Set
Hey guys anyone got a lead on a new gear set for rxv, bone stock?
Everything I found was like $5-600, and would love to have a set to replace my whiny set. I replaced every bearing, and the input shaft and bearings and still it whines, and really want it to be quiet. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-30-2018, 08:29 AM | #2 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 2010 Rxv Gear Set
Are you sure it's the rear end? Motors fed from a VFD always whine (I guess technically they aren't VFDs, since they don't have to rectify AC first). Have you compared yours with another RXV?
|
10-30-2018, 01:52 PM | #3 |
Getting Wild
Join Date: Sep 2018
Location: AL
Posts: 85
|
Re: 2010 Rxv Gear Set
Yes I've driven others some are quieter, others of like year model are same. I'm not really sure if it's the motor or the rear end.
|
10-30-2018, 02:00 PM | #4 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 2010 Rxv Gear Set
Question for RXV experts.
Did EZGO make the newer model inverters with more pulses than the older ones? In my former field, more pulses meant quieter, but also more $$. |
10-30-2018, 03:14 PM | #5 |
Gone Wild
Join Date: Oct 2008
Location: East Texas
Posts: 586
|
Re: 2010 Rxv Gear Set
All I know is prior to 2104 models, all of the RXV's that I've had made some degree of whining noise. I've had 8 2014 models and they were all quiet.
|
10-30-2018, 03:56 PM | #6 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2010 Rxv Gear Set
If it's still making noise, I would be going after the input shaft and it's bearings.
|
10-31-2018, 08:52 AM | #7 |
Getting Wild
Join Date: Sep 2018
Location: AL
Posts: 85
|
Re: 2010 Rxv Gear Set
I already replaced the input shaft and bearings, actually every bearing in the entire rear end. Used lucas 85-140, with friction modifier, and no difference. I did notice some play between the intermediate and the larger gear...
|
10-31-2018, 08:54 AM | #8 |
Getting Wild
Join Date: Sep 2018
Location: AL
Posts: 85
|
Re: 2010 Rxv Gear Set
If I had to choose one of the two gears to replace would be the intermediate, and didn't know if this would be a logical next step to replace that one gear or if I should buy a set?
I was also wondering if anyone had a hook up on the gear sets. |
11-05-2018, 11:28 AM | #9 |
Getting Wild
Join Date: Sep 2018
Location: AL
Posts: 85
|
Re: 2010 Rxv Gear Set
Where's the cheapest place to buy the gear set 620349, and 620350? Anyone dealers here that can gimme a hookup?
|
11-05-2018, 02:17 PM | #10 |
Gone Wild
Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: 2010 Rxv Gear Set
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2010 ydre high speed gear change | Electric Yamaha | |||
Gear oil? Who needs stinkin' gear oil? | Gas Yamaha | |||
2010 ST Express stripped axle splines LH on spider gear end | Electric EZGO | |||
8:1 Gear Change - Ring Gear Torque Value? | Electric EZGO | |||
ezgo marathon back gear box? question i describe in depth not sure if its gear box | Gas EZGO |