|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-12-2019, 09:18 PM | #11 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Alltrax XCT humming
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-13-2019, 11:48 AM | #12 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Alltrax XCT humming
|
02-13-2019, 02:40 PM | #13 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Alltrax XCT humming
No pre-charge resistor.
Sent from my iPhone using Tapatalk |
02-13-2019, 02:46 PM | #14 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Alltrax XCT humming
The easiest way to eliminate the Motor as being the cause of the low pre-charge voltage is to disconnect the cable from controller B+ to the Motor.
If the Voltage goes up on Controller B+, the motor (or its cable routing) is the cause. |
02-13-2019, 03:52 PM | #15 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Alltrax XCT humming
Yes- when I do that the voltage goes up about 2 volts and the noise stops.
If I disconnect either the A1 or the A2 terminal on the motor the noise also stops. There is zero resistance between those two terminals on the motor. The cables are 4 gauge and in perfect shape. Sent from my iPhone using Tapatalk |
02-13-2019, 03:55 PM | #16 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Alltrax XCT humming
Is there any resistance between A1/A2 and F1/F2?
The field winding is kept at a different voltage level and will interfere with the Armature if there is a path. Also check between any of the posts and the Motor case. |
02-13-2019, 03:56 PM | #17 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,673
|
Re: Alltrax XCT humming
Maybe you're forgetting (happens to me all the time) but If I remember right, wasnt there something weird going on inside the motor when you got that cart? I dont recall exactly what it was, but might be worth pulling the motor again and double checking
|
02-13-2019, 10:51 PM | #18 | |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Alltrax XCT humming
Quote:
A tiny cable with two wires going from one of the brushes to the motor case near the field coils was cut. Always has been. Don’t know what it was for. Sent from my iPhone using Tapatalk |
|
02-13-2019, 10:52 PM | #19 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Alltrax XCT humming
|
02-13-2019, 10:58 PM | #20 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Alltrax XCT humming
Did you also check between the Armature and the Field posts?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
constant humming | Electric EZGO | |||
G19 makes low humming noise please help! | Electric Yamaha | |||
Controller humming | Electric Club Car | |||
96 CC Humming Sound Help! | Electric Club Car | |||
g14 solenoid humming | Gas Yamaha |