|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
|
02-21-2015, 01:03 PM | #1 |
Not Yet Wild
Join Date: Feb 2015
Location: Wakeman ohio
Posts: 59
|
Recommendations on motor for medalist
I got a 95 medalist and currently has stock motor but I want to put different motor in ! Problem is im not sure what I see motors all the time on Craigslist !! Don't need anything crazy but my motor smokes on start up and instead of rebuilding it I figured I would just find a bigger motor and take some time cleaning it up and getting All my parts together while I still use the motor that's in the cart for this summer !! Any suggestions on what I should be looking for ? Thanks in advance
Sent from my tree stand 20 feet above |
02-21-2015, 02:44 PM | #2 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,183
|
Re: Recommendations on motor for medalist
Look in the Big Block Section to find what you are looking for. That's where folks talk about their experiences with motor swaps.
|
02-21-2015, 03:07 PM | #3 |
Not Yet Wild
Join Date: Feb 2015
Location: Wakeman ohio
Posts: 59
|
Ok I appreciate it
Sent from my tree stand 20 feet above |
02-21-2015, 10:45 PM | #4 |
It ain't gonna be easy.
Join Date: Apr 2008
Location: St. George, SC
Posts: 1,480
|
Re: Recommendations on motor for medalist
You can also call CT rebuilds. They make a drop in engine that's hopped up and depending on your budget, may be a good choice. Search the threads and you'll find their number
|
02-22-2015, 11:20 AM | #5 | |
Getting Wild
Join Date: Aug 2013
Posts: 129
|
Re: Recommendations on motor for medalist
Quote:
|
|
02-22-2015, 01:07 PM | #6 |
Not Yet Wild
Join Date: Feb 2015
Location: Wakeman ohio
Posts: 59
|
Funny ! I'm defiantly on the fence about swapping out motors since this thing only smokes a bit ! Probably be a lot cheaper to throw a set of rings in this motor or adjust the valves !!
Sent from my tree stand 20 feet above |
02-22-2015, 03:59 PM | #7 |
Getting Wild
Join Date: Aug 2013
Posts: 129
|
Re: Recommendations on motor for medalist
All joking aside, I wouldn't even put new rings in. As said I wouldn't do anything but run and enjoy it.
|
02-22-2015, 04:07 PM | #8 |
Not Yet Wild
Join Date: Feb 2015
Location: Wakeman ohio
Posts: 59
|
Well after pricing everything out today I believe im taking your advice !! I'll worry about a motor when I honestly need one !! !! Thanks ldj
Sent from my tree stand 20 feet above |
02-22-2015, 09:39 PM | #9 |
It ain't gonna be easy.
Join Date: Apr 2008
Location: St. George, SC
Posts: 1,480
|
Re: Recommendations on motor for medalist
Just do a valve adjustment and a basic tune up and run it.
|
02-23-2015, 07:21 AM | #10 |
Not Yet Wild
Join Date: Feb 2015
Location: Wakeman ohio
Posts: 59
|
Anyone know what the clearance is on this motor i beleive its the 295
Sent from my tree stand 20 feet above |
|
|
Similar Threads | ||||
Thread | Forum | |||
Plum Quick Quit-Series Motor Recommendations | Electric EZGO | |||
Need motor recommendations: 2005 EZGO PDS w/500aDCX controller, lifted, 23s | Electric EZGO | |||
Looking for new motor recommendations | Electric EZGO | |||
New Motor Recommendations | Lifted Golf Carts | |||
94 medalist motor | Electric EZGO |