|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-07-2016, 02:37 PM | #1 |
Not Yet Wild
Join Date: Apr 2016
Posts: 37
|
Which solenoid to go with controller?
I am trying to work on a 1998 36 volt EZGO that has an Alltrax NPX4844EZ controller on it and it has a bad solenoid. I am not sure what type of solenoid to use on it. I don't want to use the wrong one and then I would have issues. Thanks for any help.
Mark |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-07-2016, 03:38 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Which solenoid to go with controller?
Welcome to BGW
Use the MZJ200 or SW180. Both are 200a which is what the manufacture recommends for that control. Be sure to get the same voltage rating as the battery pack, 36 or 48v |
|
|
Similar Threads | ||||
Thread | Forum | |||
What controller and need solenoid? | Electric Club Car | |||
Bad Controller or Solenoid? | Electric Club Car | |||
Solenoid or Controller | Electric EZGO | |||
solenoid/controller | Electric EZGO | |||
'99 EZ GO TXT Won't Run Solenoid/Controller? | Electric EZGO |