|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-17-2018, 02:53 PM | #31 | |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 2012 Precedent "PH" Soleniod Clicks but Not Moving
Quote:
|
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-17-2018, 02:57 PM | #32 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: 2012 Precedent "PH" Soleniod Clicks but Not Moving
The correct map for the stock Precedent ADC motor should be: EJ4-4001-V9
Alltrax can send to you if it is not already installed when you get the Controller. |
10-17-2018, 04:00 PM | #33 |
Not Yet Wild
Join Date: Sep 2018
Location: Jacksonville Fl
Posts: 9
|
Re: 2012 Precedent "PH" Soleniod Clicks but Not Moving
I emailed ScottyB and he said it shipped with the Stock Mapping
|
10-26-2018, 12:25 PM | #34 |
Not Yet Wild
Join Date: Sep 2018
Location: Jacksonville Fl
Posts: 9
|
Re: 2012 Precedent "PH" Soleniod Clicks but Not Moving
So it did end up being the controller. I wired up the new Alltrax XCT 500 amp controller I got from Sottyb to the stock motor and stock solenoid and it now moves in both forward and reverse. The only issue now is the controlls are backwards. With the FNR in F the cart moves in reverse and in R the buzzer goes off and the cart moves forward. I seen a post from someone with the same issue but having trouble searching the forum from my phone.
Now to install the HD 400A Solenoid. I am waiting for the 2ga cables to arrive and I should be good to go. Thanks everyone |
10-26-2018, 12:29 PM | #35 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 2012 Precedent "PH" Soleniod Clicks but Not Moving
Swap the F1 & F2 at the controller or motor. It will work and sound correct then....
|
10-26-2018, 12:30 PM | #36 | |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: 2012 Precedent "PH" Soleniod Clicks but Not Moving
Quote:
Switch the F1 and F2 terminals. Club Car DS driver’s club #59 |
|
10-28-2018, 11:56 AM | #37 |
Not Yet Wild
Join Date: Sep 2018
Location: Jacksonville Fl
Posts: 9
|
Re: 2012 Precedent "PH" Soleniod Clicks but Not Moving
I switch to F1 and F2 on the motor and now it's working as it should. I will work this week on getting the 400 amp soleniod and 2 gauge cables installed. Thanks for all the help.
|
10-28-2018, 01:17 PM | #38 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: 2012 Precedent "PH" Soleniod Clicks but Not Moving
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2012.5 yamaha AKA "The Community Cart" | Members Rides | |||
2012 Yamaha "The Drive" only goes 6-10MPH | Gas Yamaha | |||
RACING AGAINST CANCER 2012 "The Pimp Daddy Benefit" | Events and Places to ride | |||
97 Club Car-New batteries-"jerks,clicks,&barely moves" | Electric Club Car | |||
"slow" Precedent "need Speed" | Gas Club Car |