|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-14-2019, 11:56 AM | #1 |
Not Yet Wild
Join Date: Apr 2017
Posts: 72
|
Dcs with 500 amp altrax cutting out
D&d 8hp with altrax 500 amp dcs controller and upgraded solinoid. When I hit a bump (sometimes) I lose power and the solinoid clicks. I roll a bit, let off the pedal and hit it again and it takes off. I cleaned all my connections on the motor and controller. The only wires that aren't new are F1 and F2. I don't believe I have anything grounding out to the frame either. Thanks for the advice.
Sent from my SM-G955U using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-14-2019, 11:58 AM | #2 |
Not Yet Wild
Join Date: Jan 2019
Posts: 18
|
Re: Dcs with 500 amp altrax cutting out
I’m sure someone else may be able to help you out a little better but maybe Che the pedal switch and may sure that’s not faulty.
Sent from my iPhone using Tapatalk |
03-14-2019, 12:01 PM | #3 |
Not Yet Wild
Join Date: Apr 2017
Posts: 72
|
Re: Dcs with 500 amp altrax cutting out
I should've said I switched the TPS in the floorboard with a new cart I have. Same issue.
Sent from my SM-G955U using Tapatalk |
03-14-2019, 12:15 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: Dcs with 500 amp altrax cutting out
There is a 4 wire plug in the harness between the pedal and the solenoid. I suspect it is dirty or there is a loose connection somewhere in the primary wiring... like power to the keyswitch
|
03-14-2019, 12:17 PM | #5 |
Not Yet Wild
Join Date: Apr 2017
Posts: 72
|
Re: Dcs with 500 amp altrax cutting out
|
03-14-2019, 12:25 PM | #6 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Dcs with 500 amp altrax cutting out
Quote:
D&D produces several sepex motors, Alltrax has at least two generations of sepex controllers, there are several brands of solenoids and EZGO put dcs drives in different body style carts, and all have their own idiosyncrasies. Also, when you loose power, does cart coast or does the regen braking kick in and beeper beeps? |
|
03-14-2019, 12:27 PM | #7 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Dcs with 500 amp altrax cutting out
This:
|
03-14-2019, 01:17 PM | #8 | |
Not Yet Wild
Join Date: Apr 2017
Posts: 72
|
Re: Dcs with 500 amp altrax cutting out
Quote:
Sent from my SM-G955U using Tapatalk |
|
03-14-2019, 01:18 PM | #9 | |
Not Yet Wild
Join Date: Apr 2017
Posts: 72
|
Re: Dcs with 500 amp altrax cutting out
Quote:
Sent from my SM-G955U using Tapatalk |
|
03-18-2019, 10:04 AM | #10 |
Not Yet Wild
Join Date: Apr 2017
Posts: 72
|
Re: Dcs with 500 amp altrax cutting out
Ok. Finally getting getting back. Life gets in the way sometimes. This is my set up.
Sent from my SM-G955U using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
Altrax XCT Controller | Electric EZGO | |||
altrax install help | Electric Yamaha | |||
Altrax 400 | Electric EZGO | |||
Altrax | Electric EZGO | |||
altrax??????????? | Electric EZGO |