|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-27-2019, 04:54 PM | #1 |
Not Yet Wild
Join Date: Jun 2017
Posts: 39
|
CAN plug not working on 09 RXV
Cleaned connections, programmer not powering up on 2009 RXV. Anyone have this issue? Programmer works on other carts do not the issue.
Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-27-2019, 05:40 PM | #2 |
Resident Curmudgeon
Join Date: Oct 2011
Posts: 1,279
|
Re: CAN plug not working on 09 RXV
Does it turn on but say 'No Connection!' or 'Software Unknown!'
Because I've had controllers that have failed or were failing do this, or power up and when you select a category such as 'diag realtime' or 'battery/warranty' you get 'failed to read!' A fried controller won't power up period, and there are times where one of the fuses attached to the cover with the run/tow switch blows. Also, the blue wire from charging port might have gone bad which acts like a reed switch and can shut everything down. Is the little green light lit all the time on the charge receptacle? |
07-27-2019, 11:34 PM | #3 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: CAN plug not working on 09 RXV
Quote:
Bob |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
My Trail Hog just stopped working, and then started working again. | Electric EZGO | |||
Installed AC plug port in factory plug location | Electric Club Car | |||
Charger plug and cart plug redo | Electric EZGO | |||
cig plug isnt working.... why? | Lifted Golf Carts | |||
Battery Charger Not Working - Cart Not Working | Electric EZGO |