CC Pres. need more speed and HELP

[hiway44]

I have a 2016 Club C. Precedent. Stock motor and 23 inch tires. Just installed a new Alltrax XCT 48500. Speed prior to the install was 19 mph. I also bought a HD selonoid not installed.

Here is the problem.

I have a new heavy duty soleniod need help with the wire connection on the side. Which side does the blue wire and blue with stripe wire go to.
I have attached a copy of the curtis sw180b. Solid light blue connector is larger then the blue n white.
Which way should I install.

Second.
I have the alltrax XCT 48500 controller. Throttle speed only staying around 40 %.
Alltrax tec. said it is the MCOR. Could it be the original seloniod? Speed only 19 mph. Stock motor, 23 inch tires. I was getting a consistent speed of 19 steady prior to putting the Alltrax Controller on.

[NoleFan4Ever]

This http://www.buggiesgonewild.com/elect...ml#post1557532 will help you with the new solenoid installation when you get around to it.

Let me go look at your pics for this one.

[NoleFan4Ever]

That appears to be a polarized solenoid if I am seeing the (+) and (-) indications on it. If so, then be sure to land all your Positive (Blue wire) or supplies (battery cable) on the (+) side and land the Negative (Blue/White wire) or outgoing (controller cable) on the (-) side. Since it is polarized you will not need a suppression diode but you will need to install the Regen Diode in between the 2 large posts as in the pic I linked you to.

[Bobbob]

From Carts Unlimited sight.



Sent from my iPad using Tapatalk

[i.weber]

Just went though the install. Here is my original post asking for help. Lots of good answers that will help.

http://www.buggiesgonewild.com/elect...x-upgrade.html

Sent from my SM-G975U using Tapatalk