|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-12-2019, 10:13 PM | #1 |
Not Yet Wild
Join Date: Nov 2019
Location: North Carolina
Posts: 22
|
1992 marathon motor check
How can I check the motor on 1992 marathon? Was going to jump straight from batteries, but w as not sure if I can or which terminals to hook the positive and negative to, s1, s2, a1, a2?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-12-2019, 10:17 PM | #2 | |
Gone Wild
Join Date: May 2016
Location: Central Alabama
Posts: 1,048
|
Re: 1992 marathon motor check
Quote:
I would use only two batteries, not the whole pack. |
|
11-13-2019, 10:25 AM | #3 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: 1992 marathon motor check
|
11-13-2019, 06:08 PM | #4 |
Not Yet Wild
Join Date: Nov 2019
Location: North Carolina
Posts: 22
|
Re: 1992 marathon motor check
Okay, hooked it up and the passenger side wheel pulled but the driver's side wheel did not. Is this normal?
|
11-13-2019, 06:33 PM | #5 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: 1992 marathon motor check
Yes. It’s an open differential.
|
11-13-2019, 06:39 PM | #6 |
Not Yet Wild
Join Date: Nov 2019
Location: North Carolina
Posts: 22
|
Re: 1992 marathon motor check
Thank you Lukel! Now I can put my control unit back in. Took it out to clean all connections. Hopefully it will run. Wasn't running before, but alot of the connections were corroded, so I thought I'd start at the motor and work backwards. Your help is much appreciated.
|
11-13-2019, 06:49 PM | #7 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: 1992 marathon motor check
Hopefully that’s all it is. Let us know [emoji1303]
|
11-14-2019, 03:41 PM | #8 |
Not Yet Wild
Join Date: Nov 2019
Location: North Carolina
Posts: 22
|
Re: 1992 marathon motor check
On a 1992 marathon cart.......micro switch 4 on the FNR selector......diagram shows black and white wires going to one side of switch and red and white wires going to other side. My nd mocor switch only has 2 spade connectors. If I put the black and white wires as well as the red and white wires on the same spade connector, they are connected together. Am I supposed to connect the black wire and the red wire the the middle N/C screw?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Motor check? | Electric EZGO | |||
how to check the motor | Electric Club Car | |||
how do you check the Coil, Igniter, and the RPM Limiter on a 1992? | Gas Club Car | |||
How to check motor on G9E? | Electric Yamaha | |||
motor check | Electric Club Car |