48v wiring help!!

[Pawnmaster]

2005 Club Car Precedent, 48v , I have removed the OBC and the 4 pin connector to the OBC connector at the dash and associated wiring. Added an onboard charger and voltage reducer. I have shrink wrapped all cut wires and now am left with the following:

Running battery + to solenoid, right side large connection with a pig tail to a red wire with a resistor or fuse link in it going to one side of the run/tow switch?

Running battery - to the Navitas AC controller? With a bulletin connector to a black harness wire from the cart

Dark blue wire from the cart harness to lower right solenoid connection

Yellow from the solenoid large left to the controller?

Blue\white from the controller to solenoid small left

Pink to run/tow

I have spliced the white and blue from the OBC 6 pin


Want to make sure I have all the connections I need

Only other connection I need to find is a key switch trigger wire for the voltage reducer. Need to confirm the ? Connections.