|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
06-25-2021, 04:34 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2021
Posts: 2
|
48v reducer installation
I am getting ready to install a reducer in the front of my 2017 Precedent. Can I use the unused red wire (48v) and the black/yellow (grnd) wire off the harness to draw power to the reducer or do I need to run a separate set of wires directly to the battery?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-25-2021, 04:52 PM
|
#2 |
|
Gone Wild
 Join Date: Jul 2015
Location: Central South Carolina
Posts: 939
|
Re: 48v reducer installation
I think I'd wire straight to the batteries. To wire the voltage reducer to the wiring harness would be inviting serious problems unnecessarily. Makes my hair stand up to think about putting the controller at risk.
|
|
|
|
|
06-25-2021, 05:19 PM
|
#3 |
|
Not Yet Wild
Join Date: Jun 2021
Posts: 2
|
Re: 48v reducer installation
Yea, the more I'm reading.. Sounds like the right call to go straight to the pack. Thanks!
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Voltage Reducer Installation | Electric Club Car | |||
| Reducer installation questions | Electric EZGO | |||
| Voltage reducer installation question | Electric EZGO | |||
| DC to DC Voltage Reducer Installation | Electric Yamaha | |||
| voltage reducer installation | Electric Yamaha | |||
Linear Mode
