12-13-2009, 09:30 PM | #1 |
Not Yet Wild
Join Date: Nov 2009
Location: cumming,ga
Posts: 39
|
6"spindle for carryall2 ?
I am still new to golf carts and I posted earlier this year that I purchased a 2004 carryall turf2 that had front end damage.I made a metal plate so that I could get the front end straight.The thing is know I will have to use a spindle lift because the A-arm lifts bolt to the front of the frame.My ? is how good are the spindle lifts.
Are there any other options.I thought about getting one of the A-arm lifts that are shorter and mounting it under the frame and ether making new rear monts or cutting the ones that come with the lift down. Thanks scott |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-14-2009, 09:54 AM | #2 |
Bad *** Speller!
Join Date: Oct 2009
Location: Columbus, Ohio
Posts: 1,338
|
Re: 6"spindle for carryall2 ?
the a arms bolt to the bottom of the shock mount. the rack and pinion and the shocks mount to the top. my cc dealer has itfor around 65 dollars. i have a tuf 2 xrt and it did a header into a cherry tree. it broke the front frame peice(aluniunim) that just bolts to the main frame and shock mount. it beat the bumber and thebrush gaurd in to a "u". and it bent the flex joint in the rack in pinion 90 degrees. i ended up buying a new rack(easier then trying to find if peices still available, the finding out it had furthere damage) the shock mount was tweeked, so straightened it out as straighta s possible. and had the front frame repaired for 40 bucks. the had to completely redo it, and massage it back to like. know it together, frnot end is alive, and i also had to pull the wheels and spindles to get the old dried out grease whith a torch, so the spindles will take grease. i found that out once i got it in the air, rack and pinion off and the wheels did not wont to turn very easy. afteer words, turns real nice!
|
12-17-2009, 06:58 AM | #3 |
Not Yet Wild
Join Date: Nov 2009
Location: cumming,ga
Posts: 39
|
Re: 6"spindle for carryall2 ?
I ordered 6" a-arm lift I think that I can make it work.We will see.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Jake's 6" Spindle Lift Kit | Lifted Golf Carts | |||
Jake's 6" Spindle Lift Kit Question | Electric Club Car | |||
Cut and reweld spindle to get 4" lift? | Lifted Golf Carts | |||
6" Jakes spindle lift for 84-96 Club Car | Golf Carts and Parts | |||
6" Spindle versus 8" A-Arm | Lifted Golf Carts |