|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-25-2010, 11:35 PM | #1 |
Not Yet Wild
Join Date: Feb 2010
Posts: 64
|
Pictures of my wires connecting to motor.
These are the wires that connect to my motor on my 97' series cart. Could this be robbing my power?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-26-2010, 12:36 AM | #2 |
ZONE FREE ZONE
Join Date: Nov 2009
Location: lauderdale by the sea
Posts: 571
|
Re: Pictures of my wires connecting to motor.
there is a good chance that the corrosion is causing resistance.
|
02-26-2010, 09:26 AM | #3 |
Not Yet Wild
Join Date: Feb 2010
Posts: 64
|
Re: Pictures of my wires connecting to motor.
Should I go with 2 ga. wire and new connectors to my motor?
|
02-26-2010, 09:31 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: Pictures of my wires connecting to motor.
deleat .......4 ga is probably good enough. Very Very important that you use 2 wrenches disconnecting those wires to insure that the one closest to the motor does not spin ... if it does, you will have big trouble.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Wires from FNR switch to motor getting VERY hot! | Electric EZGO | |||
Question about wires,motor | Electric EZGO | |||
G1 connecting rod removal | Gas Yamaha | |||
Re: big block golf cart build (link to many pictures) NEW PICTURES ADDED | Big Block Talk! | |||
G16 connecting ROD | Golf Carts and Parts |