|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-03-2013, 06:15 PM | #1 |
Not Yet Wild
Join Date: Feb 2013
Posts: 14
|
91 Marathon Restoration w/txt front end and pics
So, I started my project 3 weekends ago. Have been working on it every Saturday.
So far, I have stripped it down, got her running good. New motor, batteries and still working on a little bit of the wiring. New fwd/rev switch. Today I started the front end phase. I could not find a replacement front metal cowl, so I received a post from the guy with a yellow marathon on here that has the txt front end. Here you go. I will try to take picture for any one who cares if I dont get lost in ideas while Im working. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-03-2013, 06:38 PM | #4 |
Not Yet Wild
Join Date: Feb 2013
Posts: 14
|
Re: 91 Marathon Restoration w/txt front end and pics
As you can see, to fit the txt front end, you have to round the front end. I started with cutting off small portions until I finally was able to fit the txt front end on. Currently the two bottom holes on the txt cowl align perfectly with the holes in the frame of the marathon. And the mounting plate that goes on the dash supports the top of the cover. I added two brackets and I will be filling in the two factory holes on the side of the txt cover. I will be drilling new ones to mount the sides of the cover and eventually the struts to support the roof.
I can do everything in the world mechanically except for weld. This was absolutely the first time in my life I have ever touched a welder. So hold the jokes. It took me two hours for about two feet of welding. LOL. It is strong as hell though. |
03-03-2013, 06:41 PM | #5 |
Not Yet Wild
Join Date: Feb 2013
Posts: 14
|
Re: 91 Marathon Restoration w/txt front end and pics
Next steps are to find a dash, fit the dash, make the final mounting points for the front end.
Then, I will be starting the lift kit and suspension rebuild while the panels are off to paint. If anyone has a dash for sale, let me know before I buy a new one. I have an extra marathon for parts that I am using. If anyone needs anything, let me know. Will sell parts for cheap if I don't need them. |
03-03-2013, 06:55 PM | #6 |
Gone Wild
Join Date: Dec 2012
Location: Warren Mi
Posts: 233
|
Re: 91 Marathon Restoration w/txt front end and pics
It looks cool!! Thanks for posting pic's !! It may help me out some day!
|
03-03-2013, 06:58 PM | #7 |
Gone Wild
Join Date: Oct 2010
Location: Lawrenceburg Ky.
Posts: 1,771
|
Re: 91 Marathon Restoration w/txt front end and pics
Looks like a lot of fun.
|
12-16-2013, 06:12 PM | #8 |
Not Yet Wild
Join Date: Feb 2013
Posts: 14
|
Need Help, IM back!!!
Well,
I had to put the project on hold for work and some personal items. But, Im back and need some help. I have two more problems to fix and then it is time for reassembly. I installed a new forward/reverse contactor assembly. It only has 1 fwd and 1 rev switch, not like the schematic that has a total of 3. I have forward with no issues. Reverse only works when I push the switch in with my fingertip. Is something adjusted or hooked up wrong? Please help. I will post some pics tomorrow. If I put the contactor in reverse, push the microswitch and release with my fingertip, reverse works fine. Forward always works fine. |
12-17-2013, 08:59 PM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 91 Marathon Restoration w/txt front end and pics
You may be connected to the wrong microswitch (ms). Of the 2 ms on the F&R one is triggered in both direction and one is triggered in reverse only. The potentiometer ms should connect to the one that triggers in both directions. I think this will solve your problem. Follow the diagram below.
|
12-17-2013, 09:14 PM | #10 | |
Not Yet Wild
Join Date: Feb 2013
Posts: 14
|
Re: 91 Marathon Restoration w/txt front end and pics
I think this might be my issue. The schematic and every other schematic that I have seen has a total of 3 microswitches on the contactor. I bought a new one from Nivel and it only has two. They are certain that it is the correct one for the marathon. Should I add another switch?
Can I combine the wiring on the side with the 2 switches?? I am thinking something may short out. Quote:
|
|
Tags |
marathon cowl replacement |
|
|
Similar Threads | ||||
Thread | Forum | |||
1991 Marathon Restoration | Gas EZGO | |||
Marathon restoration | Gas EZGO | |||
'94 Marathon need pics of front cowl | Drivers Clubs | |||
More pics of my restoration/rebuild | Members Rides | |||
Pics of my restoration Ezgo Gasser | On Road Golf Carts! |