Mounting a Alltrax 48500 in a EZGO

[porthole]

Originally Posted by MAD-DOG

OK so this thing is BIG I cant find out how to mount this to fit on a 99 Ezgo .. anyone put this in ? Could you post a Picture so I might get some ideas .. Thanks

I forgot to add a picture of the replacement controller. But, it is in the same location as the original in this picture

http://www.buggiesgonewild.com/elect...tml#post741160

[porthole]

Here is my Alltrax SPM 48500EZ
Cart is a 98 TXT

[racon181]

Originally Posted by sowilliams

Put mine in over the motor.

Please share some more details on how you mounted the controller, solenoid, and r-contactor. I am working on this now. You did a great job on this. I would greatly appreciate it.

[scottyb]

Originally Posted by racon181

Please share some more details on how you mounted the controller, solenoid, and r-contactor. I am working on this now. You did a great job on this. I would greatly appreciate it.

Installation is laid out in the manual... Any water that runs off the rear of the seat goes into the fan vent on this install.
This link to the online SPM manual here > http://www.alltraxinc.com/files/DOC1...ORS-MANUAL.pdf
Installation begins on page 16, pics on pg 23.

[MAD-DOG]

Exactly how Scotty described it works perfect.

[racon181]

Thank you for all the help.

[kpauley]

I have a 99 TXT as well with the same controller. I mounted it as the manual from AllTrax stated, using the existing screw holes in the heat sink. Seemed to work just fine. Happy to take a picture or two if you need more inspiration, just let me know. Sounds like you may be on the right track but will grab shots if you want them.