|
02-15-2010, 03:19 PM
|
#21 |
|
What the ....?
 Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,931
|
Re: 3600 Rpm
3600 rpm's, final gear ratio 6, 18" tires = 32.1 mph
You could bring the RPM's up alittle (4000 rpm's) to get you a bit more speed, but, IMO... your doing pretty well! (I'm jealous!  ) |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-15-2010, 09:14 PM
|
#22 |
|
Not Yet Wild
Join Date: Feb 2010
Location: Southwest of Fort Worth, TX
Posts: 23
|
Re: 3600 Rpm
I am putting a tach in my club car and I believe it is a 2cylinder but need to make sure. Could someone help. Plus on a 4 cylinder tach I would decide the RPM by 2 right? Or is it multiply by 2? Thank you.
|
|
|
|
|
02-16-2010, 06:42 AM
|
#23 |
|
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,931
|
Re: 3600 Rpm
Installing? or using a tach?
2 cylinder? or 2 cycle? Most Tachometers measure Rotations Per Minute with just 1 cylinder, no matter how many cylinders the engine has! (although... 2 cycle and 4 cycle engines are two completely different animals) I used an old car tach (8 cyl's) to set mine, it worked just fine! (without having to do any calculating!) for some reason... I can bet I'm missing something again!  |
|
|
|
 |
|
||||||
|
|
Linear Mode
