|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-12-2013, 11:57 AM | #1 |
Not Yet Wild
Join Date: May 2013
Location: Minnesota
Posts: 6
|
Charging issues after replacing battery cables
I recently replaced my 6 gauge battery cables for 4 gauge battery cables and when I plug it in to charge the charger makes a whining noise and it does not fully charge the battery. It will stop charging and my error 1 & 2 lights on my charger turn on. But when I unplug and replug it in it starts charging again with that same noise.
Any ideas? Thanks in advance. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-12-2013, 12:20 PM | #2 |
Guest
Posts: n/a
|
Re: Charging issues after replacing battery cables
|
07-12-2013, 02:05 PM | #3 |
Not Yet Wild
Join Date: May 2013
Location: Minnesota
Posts: 6
|
Re: Charging issues after replacing battery cables
Sorry, newbie to the forum.
2009 yamaha ydre 48 volt. |
07-12-2013, 02:39 PM | #4 |
Guest
Posts: n/a
|
Re: Charging issues after replacing battery cables
first check wiring make double sure you have cables correct
if all you did was change battery cabels then that is all it could be |
07-12-2013, 02:43 PM | #5 |
Guest
Posts: n/a
|
Re: Charging issues after replacing battery cables
|
Tags |
48v, battery cables, charging problem, yamaha ydre |
|
|
Similar Threads | ||||
Thread | Forum | |||
Battery charging issues | Electric Club Car | |||
G1 Battery/ Charging Issues | Gas Yamaha | |||
Battery charging issues!y | Electric Club Car | |||
replacing battery cables | Electric Club Car | |||
EZGO Battery Charging Issues | Electric EZGO |