|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-27-2014, 09:47 AM | #1 |
Gone Wild
Join Date: Apr 2009
Location: Minnesota
Posts: 163
|
Need a hub off of a G29
Is anyone parting out a Yamaha drive? if so, I could use one of the wheel hubs. I had a stripped bolt and had to cut one of the corners of the hub off to remove it.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-27-2014, 08:08 PM | #2 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: Need a hub off of a G29
Front or rear?
|
05-27-2014, 08:48 PM | #3 |
Gone Wild
Join Date: Apr 2009
Location: Minnesota
Posts: 163
|
Re: Need a hub off of a G29
Front
|
05-27-2014, 09:15 PM | #4 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: Need a hub off of a G29
Front hub from g16 -ydr will fit.
|
05-28-2014, 07:33 AM | #5 |
Gone Wild
Join Date: Apr 2009
Location: Minnesota
Posts: 163
|
Re: Need a hub off of a G29
Thanks
|
05-30-2014, 02:12 PM | #6 |
Not Yet Wild
Join Date: Mar 2014
Posts: 9
|
Re: Need a hub off of a G29
g22 is same also
|
05-30-2014, 03:08 PM | #7 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Need a hub off of a G29
A G22 does fall between G16 and YDR. I will add that some Umax front hubs may not be appropriate due to the front brakes.
|