|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-14-2015, 12:02 PM | #1 |
Gone Wild
Join Date: Aug 2014
Location: Akron, Ohio
Posts: 189
|
G2 kingpin issue
Hello again. I have a g2. The passenger tire was cambered out and the tire was worn down when I got the cart. I figured it was the kingpin bushings so I replaced both sides. The passenger side is still cambered out along with the driver side now. Could I have done something wrong? There is no play in the hubs.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-14-2015, 06:43 PM | #2 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G2 kingpin issue
Don't know if its possable,but did you keep each spindle on correct side?
|
10-14-2015, 06:45 PM | #3 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G2 kingpin issue
Wholy smokes Can you take a tire of and show the spindle king pin area? Did you change the shocks?
|
10-14-2015, 07:03 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G2 kingpin issue
Gotta be different shocks in someones attempt to "lift" it. That aint kingpin bushings.
|
10-14-2015, 07:08 PM | #5 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G2 kingpin issue
|
10-14-2015, 08:12 PM | #6 |
Gone Wild
Join Date: Aug 2014
Location: Akron, Ohio
Posts: 189
|
Re: G2 kingpin issue
I kept each spindle on the proper side. I only worked on one side at a time. Ill drive it some more and post up a picture of the shocks if nothing changes.
|
10-14-2015, 08:37 PM | #7 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G2 kingpin issue
We do need a picture. The A arms look pretty flat, Things get heywire out on the ends.
Maybe previous owner messed up!! The right tire wear suggests that!! |
10-14-2015, 08:55 PM | #8 |
Not Yet Wild
Join Date: Oct 2015
Location: Northern Wyoming
Posts: 25
|
Re: G2 kingpin issue
Not sure why or even how but it almost looks to me like the arms are mounted upside down.
Last edited by buggybomb; 10-14-2015 at 10:09 PM.. Reason: spelling fail |
10-15-2015, 07:50 PM | #9 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: G2 kingpin issue
Arms are flat its not jacked up by the shocks. The arms or spindles are not right. Though I don't recognize that bracket on the front mount.
|
10-16-2015, 03:16 AM | #10 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G2 kingpin issue
Yep, i noticed that later, a-arms are flat... Spindles upside down is my best guess. Best guess is all we got 'till another pic or 2 comes back.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Bent Kingpin | Gas Club Car | |||
kingpin has play | Gas EZGO | |||
94 G9 Kingpin Replacement | Gas Yamaha | |||
kingpin play | Gas EZGO | |||
Kingpin replacement no instructions?!?!94 G9 | Gas Yamaha |