|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-23-2010, 05:25 PM | #1 |
Not Yet Wild
Join Date: Apr 2010
Location: Monroe, Georgia
Posts: 6
|
Allsports a-arm lift problem
I have started installing a 6" a-arm lift. The wheel hub that I took off of the 2006 cc ds has a little slop on the new lift and the wheel hub nut is not the same size. Is this normal and where would I get the correct spindle nut.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-23-2010, 06:40 PM | #2 |
Gone Wild
Join Date: Jan 2007
Location: La Porte Indiana
Posts: 1,392
|
Re: Allsports a-arm lift problem
i would think you have the wrong lift. at some point 92004? i think)cc changed from american to metric. they also went from a tapered bearing set to a sealed bearing.
you are either going to have to get the correct spindles, or get a set of hubs and bearings to match the lift you have. -Aaron |
06-24-2010, 08:25 PM | #3 |
Not Yet Wild
Join Date: Apr 2010
Location: Monroe, Georgia
Posts: 6
|
Re: Allsports a-arm lift problem
Thank you 4vertical. You were right on the money. They sold me the wrong lift. Ended up changing out the hubs since everything was already installed and it was a long drive to where it was purchased.
|
06-24-2010, 08:59 PM | #4 |
Gone Wild
Join Date: Jan 2007
Location: La Porte Indiana
Posts: 1,392
|
Re: Allsports a-arm lift problem
where are you located?
-Aaron |
06-27-2010, 07:27 AM | #5 |
Not Yet Wild
Join Date: Apr 2010
Location: Monroe, Georgia
Posts: 6
|
Re: Allsports a-arm lift problem
Monroe, ga
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Replaced my BU lift with an Allsports | Lifted Golf Carts | |||
Which Allsports lift? | Lifted Golf Carts | |||
2007 EZ-GO and Allsports lift kit | Lifted Golf Carts | |||
Allsports G9 lift | Lifted Golf Carts | |||
Allsports lift | Electric EZGO |