|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-01-2008, 03:33 PM | #1 |
Not Yet Wild
Join Date: Sep 2008
Posts: 15
|
cart wont start after running perfect
Hey all-
Just bought a 1990 ish gas club car. Everything worked great until one morning I got in and turned the ignition to "on", pressed on the gas, and nothing happened. figured it was electrical so traced the problem to the starter, which was getting zero volts. The battery was fully charged, and the only way to get the car started now is to use a screw driver to connect the two posts on the solenoid. This will start the car, and it will run until I let off the gas. I just bought and replaced the solenoid, and no wires are visibly disconnected or broken. Anyone have these problems and know of some possible problems I could be having? Any help would be greatly appreciated. -Jeff |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-01-2008, 08:15 PM | #2 |
Gone Wild
Join Date: Jun 2008
Posts: 192
|
Re: cart wont start after running perfect
blown fuse ?????
|
10-02-2008, 01:07 PM | #3 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: cart wont start after running perfect
did you check the micro switch?..........................................8 )
|
10-02-2008, 04:05 PM | #4 |
Gone Wild
Join Date: Sep 2008
Location: Beaufort SC
Posts: 428
|
Re: cart wont start after running perfect
Im guessing micro switch. Check the voltage coming in and make sure it coming out. Then check voltage at the solenoid. Positive on one side and negative on the other. If you not getting voltage then it wont engage the solenoid
|
10-07-2008, 12:01 PM | #5 |
Not Yet Wild
Join Date: Sep 2008
Posts: 15
|
Re: cart wont start after running perfect
where do i find new microswitches?
|
10-07-2008, 12:41 PM | #6 |
Gone Wild
Join Date: Sep 2008
Location: Beaufort SC
Posts: 428
|
Re: cart wont start after running perfect
Ebay or the dealer or carts parts plus
|
10-13-2008, 04:21 PM | #7 |
Not Yet Wild
Join Date: Sep 2008
Posts: 15
|
Re: cart wont start after running perfect
new micros installed.. and nothing still? i have installed a new seloniod and new micros? what else am i missing? the Selinoid is getting power (12.14v) when tested on the large poles.. I press the gas pedal and i get nothing on the smaller two sides?
|
10-13-2008, 07:22 PM | #8 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: cart wont start after running perfect
are you certain you wired the solenoid back up right?............................
|
10-13-2008, 07:43 PM | #9 |
Not Yet Wild
Join Date: Sep 2008
Posts: 15
|
Re: cart wont start after running perfect
if i took a picture? could yall tell me if its right or wrong?.. ill take one anyway and post
|
10-14-2008, 10:45 AM | #10 |
Not Yet Wild
Join Date: Sep 2008
Posts: 15
|
Re: cart wont start after running perfect
|
|
|
Similar Threads | ||||
Thread | Forum | |||
85 Electric EZGO Cart wont start | Electric EZGO | |||
well..my new cart wont start...... | Gas Club Car | |||
Yamaha Golf Cart Wont Start | Gas Yamaha | |||
Cart wont start | Gas EZGO | |||
Old golf cart wont start | Gas Yamaha |