|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-26-2015, 11:45 AM | #1 |
Not Yet Wild
Join Date: Apr 2015
Location: Tampa, Fla.
Posts: 34
|
4 awg vs 2 awg cables
I'm in the process of doing the 36/48 conversion on my DS.
I have a 550 amp CTS Reman controller (Curtis). I've ordered an HD F&R switch, as well as a 1000/400 solenoid. My question is: Do 2awg cables make that much of a difference over 4awg? I've heard, and it makes sense that the only advantage of the larger wire is temperature. So I'm wondering if the 2awg is worth the extra cost. Also, any preference as to who makes/sells the best cable sets? Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-26-2015, 01:37 PM | #2 |
Not Yet Wild
Join Date: Apr 2015
Location: Tampa, Fla.
Posts: 34
|
Re: 4 awg vs 2 awg cables
Everyone must be working hard.....Like I should be.
|
05-26-2015, 02:35 PM | #3 |
Gone Wild
Join Date: Sep 2012
Location: Chestermere, Alberta - Canada
Posts: 1,146
|
Re: 4 awg vs 2 awg cables
Pretty quiet out there. I am told that SERIES carts benefit most from 2 awg cables (torque/hill climbing) because the motor/cable distances in a series set-up are quite a bit longer. If you are buying a cable set, make sure you buy one that is cut to match your specific cart's dimensions. I recommend buying from a site sponsor - one who can furnish the OBC thru connector if stepping up to 2 awg.
|
05-26-2015, 02:59 PM | #4 |
Gone Wild
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: 4 awg vs 2 awg cables
I agree with joesam. A very smart guy on the ezgo side calculated the difference in voltage drop between 2g and 4g wires over the typical length of a wire set in a series cart. Small numbers but an advantage in the 2g set.
Also I believe some speed control manufactures are recommending 2g for controllers of 500amps and up. A site sponsor (cartsunlimited.net) has some of these wire sets on sale including the OBC stud kit. I have some and they are first class. Not cheap, however. Right now I see that there is only a $20 price difference between 2g or 4g. For $20, I would certainly go for the 2g. My opinion. |
05-26-2015, 03:05 PM | #5 |
Not Yet Wild
Join Date: Apr 2015
Location: Tampa, Fla.
Posts: 34
|
Re: 4 awg vs 2 awg cables
Yeah thanks joe. I was kind of leaning toward 2awg just in case I ever wanted to upgrade anything else in the future.
I'm learning as I go, what does the OBC thru connector do? |
05-26-2015, 03:24 PM | #6 |
Gone Wild
Join Date: Jan 2014
Location: Okatie, SC
Posts: 310
|
Re: 4 awg vs 2 awg cables
It lets you use 2awg cable and uses a brass stud to pass thru the OBC and connect the 2awg on the other side. The hole is only big enough for 6 awg and some 4 awg. BTW the hole cannot be made bigger without damage. Or, some do away with the OBC and buy a DPI Charger.
http://www.cartsunlimited.net/Batter..._Upgrades.html at bottom of page |
05-26-2015, 03:40 PM | #7 |
Cave Dweller
Join Date: Apr 2013
Location: Always On The Move
Posts: 22,232
|
Re: 4 awg vs 2 awg cables
2ga all the way with a controller of that size. I was 4ga with a 700 amp controller and went to 2ga and have seen temp difference of the cables and battery posts. I made my own cables and used roughly 29 feet on my series cart. I also turned 3 of my batteries around so all my cables run on the outside and do not cross over battery fill caps.
|
05-26-2015, 03:43 PM | #8 |
Not Yet Wild
Join Date: Apr 2015
Location: Tampa, Fla.
Posts: 34
|
Re: 4 awg vs 2 awg cables
On Board Charger, got it. I don't have one on my cart, the plug goes in the front next to the F&R switch.
You got your cables at carts unlinmited? |
05-26-2015, 03:50 PM | #9 |
Not Yet Wild
Join Date: Apr 2015
Location: Tampa, Fla.
Posts: 34
|
Re: 4 awg vs 2 awg cables
That looks like an excellent idea swan. I like the looks of your cart. I ordered an Allsports 6" Super Sport, and 23x10x12's. I'm down to the cable set left to order. I believe I'll listen to experience and go with 2awg. Did you crimp your connectors or solder them? There's a welder supply shop not too far out of my way, but I'm not sure it would'nt be more cost effective to buy them pre-cut.
|
05-26-2015, 04:01 PM | #10 | |
Gone Wild
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: 4 awg vs 2 awg cables
Quote:
I'm thinking 36v carts didn't have an OBC but I'm an ezgo guy so what do I know. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Welding cables vrs regular cables | Electric Club Car | |||
4g battery cables with 2g motor cables | Electric EZGO | |||
did i already have 4 ga cables | Electric EZGO | |||
1/0 Battery Cables to 6 AWG Motor Cables | Electric EZGO | |||
what will changing my cables to 4g welding cables do to my performance exactly | Electric EZGO |