Alltrax updates

[MillwrightMike]

Is it a specific set of maps or all of the new maps that have the increased torque performance?

Sent from my SM-N920V using Tapatalk

[FreshFromFL]

Would there be any benefit to updating with an xct400 and an Es 76-51 motor combo?

[scottyb]

Yes, please start a new thread on this question. We will keep this thread focused on Alltrax Updates, thank you

[MattFX4]

Scotty, i haven't updated software or control field map for my xct 500 since I got it roughly
1 year ago. Do you recommend doing so?

[jakesnake27]

Originally Posted by MattFX4

Scotty, i haven't updated software or control field map for my xct 500 since I got it roughly
1 year ago. Do you recommend doing so?

I will answer for Scotty...

Yes, these updates are always recommended.

[scottyb]

Yes there are performance and program upgrades waiting for you...

[scottyb]

I didn't see an updated map for my TXT48 so I simply customized the torque map to look like the new PDS map rising rapidly to 90% vertical in the first 8-10% of travel and I really like it. Slow inclines are a breeze, smooth and strong.
I recommend it for any one

[mattadata]

Originally Posted by scottyb

I didn't see an updated map for my TXT48 so I simply customized the torque map to look like the new PDS map rising rapidly to 90% vertical in the first 8-10% of travel and I really like it. Slow inclines are a breeze, smooth and strong.
I recommend it for any one

Care to export and share the torque map with us TXT48 owners?

[scottyb]

Basically I copied this new PDS map. Looking at it now I was probably a little less aggressive, like I said 90% in 10%
The map is saved to the shop laptop which does not have internet access today.

[ncrr]

Originally Posted by scottyb

New field maps including a Uni-map1 which as it sounds like will work with any Sepex motor... and actually must have been written to correct the IQ_V3 problem because it works great with the OEM IQ motors.

Is there a place that show's us newbies,

1. Where the maps, i.e. 'Uni-map1' are located?
2. The steps needed to download a map?
3. How to upload the map to our controller?

I had asked about this on the Alltrax website, and was not able to get a good stepwise procedure. I'm sure it's easy, once you find out how.....
Thanks, Henri