|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
06-25-2017, 09:55 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2017
Location: Daytona Beach
Posts: 26
|
how do i change a 5k-0 vglide to 0-5k
is it possible to change a 5k-0 glide to 0-5k it is on a 1998 48 volt series cart.any help would be appreciated
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-25-2017, 09:57 PM
|
#2 |
|
Gone Wild
 Join Date: Sep 2015
Location: Cincinnati, Ohio
Posts: 1,354
|
Re: how do i change a 5k-0 vglide to 0-5k
Dawg?
Dawg? calling the Dawg.... TahoeDawg from Revolution will give you guidance on this I'm sure. |
|
|
|
|
06-25-2017, 09:58 PM
|
#3 |
|
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: how do i change a 5k-0 vglide to 0-5k
I have no idea. I've never needed to do such a thing. Calling Sergio!
|
|
|
|
|
06-25-2017, 10:25 PM
|
#4 |
|
Guest
Posts: n/a
|
Re: how do i change a 5k-0 vglide to 0-5k
i see your other post you have a controller
change the resistors in v glide Last edited by crash test dummy; 06-25-2017 at 10:48 PM.. Reason: saw other post |
|
|
|
06-26-2017, 06:12 AM
|
#5 |
|
Not Yet Wild
Join Date: May 2017
Location: Daytona Beach
Posts: 26
|
Re: how do i change a 5k-0 vglide to 0-5k
thanks for the info i was hoping that would do it but wanted to be sure didn't want to ruin the controller
|
|
|
|
|
06-26-2017, 06:47 AM
|
#6 |
|
Guest
Posts: n/a
|
Re: how do i change a 5k-0 vglide to 0-5k
never done it so it is only an idea (best guess)
|
|
|
|
06-26-2017, 12:17 PM
|
#7 |
|
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: how do i change a 5k-0 vglide to 0-5k
Are You planning in running reduced speed in reverse?
If so there is a few other wiring changes you need to make. You do not need to change the resistors, but You should add a piece of wire between the 2nd and 3rd posts. That is a safety measure since 0-5kΩ Curtis Controller will default to "Go" if the Pedal micro-switch fails closed or it closes before the wiper arm is over post #3 (which means no-signal present). |
|
|
|
|
06-26-2017, 05:50 PM
|
#8 |
|
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: how do i change a 5k-0 vglide to 0-5k
You can do it.
swap the end wires, purple and ? I did one many moons ago. |
|
|
|
|
07-23-2017, 08:56 PM
|
#9 |
|
Not Yet Wild
Join Date: Jul 2017
Posts: 5
|
Re: how do i change a 5k-0 vglide to 0-5k
BTW, I'm in the same situation where I need to reverse output from 0-5K to 5-0K. I reversed the purple (Top) and yellow (lower) and It shows 5000k at rest but no modulation or movement along the rest of the curve... Have you found a solution to this riddle...
If I reverse the resistors order, would it make the trick..? |
|
|
|
|
07-24-2017, 06:39 AM
|
#10 |
|
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: how do i change a 5k-0 vglide to 0-5k
You don't need to touch the resistors.
If You currently have a 0-5kΩ (2-wire) and You want to convert it to a Club Car 5k-0Ω (3-wire), read this post: http://www.buggiesgonewild.com/elect...ml#post1062722 If You have a Club Car 5k-0Ω (3-wire) and want to use it with a 0-5kΩ (2-wire) Controller, read this post: http://www.buggiesgonewild.com/elect...ml#post1402338 |
|
|
|
|
| Tags |
| vglide |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| DS 36v vglide | Electric Club Car | |||
| cc ds vglide 36v vglide box | Electric Club Car | |||
| 94 cc ds 36v vglide | Electric Club Car | |||
| vglide help | Electric Club Car | |||
| Question converting VGlide&coils to Vglide&controller | Electric Club Car | |||
Linear Mode
