|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
11-01-2017, 05:23 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2012
Location: Tallahassee
Posts: 9
|
Jumpy on take off, stalls at top end
So i did up grade from scottyb 4 or 5 years ago from resistor to controller complete with torque motor. Best money i ever spent. Don't know what has happened to cause the accelerator pedal to be super jumpy on start and than stall as it approaches top end. What needs help ?
Thanks in advance ! |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-01-2017, 05:30 PM
|
#2 |
|
MOD of all BS!
 Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Jumpy on take off, stalls at top end
2 things come to mind MCOR/Potentiometer.
|
|
|
|
|
11-01-2017, 05:55 PM
|
#3 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Jumpy on take off, stalls at top end
The potentiometer is wet and/or out of adjustment. I would bet a hairdryer might fix it.
|
|
|
|
|
11-01-2017, 06:43 PM
|
#4 |
|
Not Yet Wild
Join Date: Sep 2012
Location: Tallahassee
Posts: 9
|
Re: Jumpy on take off, stalls at top end
So i have had the cart stored in a garage an can safely rule out water I believe . Will it be the small switch where wires go in the potentiometer that has failed ?
|
|
|
|
|
11-01-2017, 06:46 PM
|
#5 |
|
Not Yet Wild
Join Date: Sep 2012
Location: Tallahassee
Posts: 9
|
Re: Jumpy on take off, stalls at top end
I have never had to adjust the potentiometer, do I replace the entire MCOR ( i assume that's the assembly that serves as a throttle when pedal is pushed ?
Sorry to be so stupid |
|
|
|
|
11-01-2017, 06:54 PM
|
#6 |
|
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Jumpy on take off, stalls at top end
If You did a conversion from a Resistor cart, You do not have an MCOR.
If it is a Curtis PB-6(5) box, I think You can find the potentiometer for sale, maybe some sponsor sells them... |
|
|
|
|
11-01-2017, 07:07 PM
|
#7 |
|
Not Yet Wild
Join Date: Sep 2012
Location: Tallahassee
Posts: 9
|
Re: Jumpy on take off, stalls at top end
Attachment 161312 trying to atttach pic of assembly
|
|
|
|
|
11-01-2017, 07:07 PM
|
#8 |
|
Not Yet Wild
Join Date: Sep 2012
Location: Tallahassee
Posts: 9
|
Re: Jumpy on take off, stalls at top end
Happy to buy part just not sure of the nomenclature?
|
|
|
|
|
11-01-2017, 07:11 PM
|
#10 |
|
Not Yet Wild
Join Date: Sep 2012
Location: Tallahassee
Posts: 9
|
Re: Jumpy on take off, stalls at top end
Okay there is the MCOR ? Is that right ? Where should i go to purchase and if I ask for a MCOR will that be correct, or enough info to seller ?
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G16 Jumpy Throttle | Gas Yamaha | |||
| 97 cc Jumpy at start | Electric Club Car | |||
| 89 marathon runs stalls runs stalls | Gas EZGO | |||
| G1 Jumpy | Gas Yamaha | |||
| its jumpy when trying to take off | Electric Club Car | |||
Linear Mode
