|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-06-2018, 11:29 AM | #1 |
Not Yet Wild
Join Date: Jan 2018
Posts: 17
|
need a little info
ok I'm almost done with my cart wiring. just installed rhox volt reducer only thing not working right is the key switch maybe i used the wrong wire but nothing turns on with key only use the run tow switch that is where my problem is cc precedent 4x12
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-06-2018, 11:49 AM | #2 |
Gone Wild
Join Date: May 2015
Location: Houston
Posts: 903
|
Re: need a little info
Your tow switch activates the 48 volt current to the key. Without the tow switch on run, there is no voltage to the key switch. Therefore the reducer cannot come on. You cannot run accessories with a key activated reducer without the cart in RUN.
|
03-06-2018, 11:54 AM | #3 |
Not Yet Wild
Join Date: Jan 2018
Posts: 17
|
Re: need a little info
ok sending u a pm
|
03-06-2018, 12:38 PM | #4 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: need a little info
Move the trigger wire to the other side of the key switch. It needs to be on the same side as the blue wire. This way, the reducer will ONLY come on with the tow/run switch in RUN and with the key ON.
|
03-06-2018, 12:42 PM | #5 |
Not Yet Wild
Join Date: Jan 2018
Posts: 17
|
Re: need a little info
that was what i was wondering just didn't want to mess anything up
|
|
|
Similar Threads | ||||
Thread | Forum | |||
par car info | Gas Columbia ParCar | |||
need info | Gas Club Car | |||
need info | Gas Club Car |