|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-21-2018, 03:47 PM | #1 |
Not Yet Wild
Join Date: Apr 2018
Posts: 2
|
DCX Controller Help
New to the website and searching for solution help. I have a DCX 500 controller on my EZ-GO. When I turn the key on the green indicator continuously blinks. I replaced the solenoid and will heat up and small amounts of smoke emits.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-21-2018, 04:35 PM | #2 |
Gone Wild
Join Date: Apr 2017
Location: SE TN
Posts: 2,227
|
Re: DCX Controller Help
Make sure it is a 36 or 48 volt solenoid to match your battery voltage and not a 12v automotive.
|
04-21-2018, 04:50 PM | #3 |
Not Yet Wild
Join Date: Apr 2018
Posts: 2
|
Re: DCX Controller Help
It is a 48v ordered with the same part number for the cart.
I have the connector off of the DCX and do not have power at pins 9 or 10. |
|
|
Similar Threads | ||||
Thread | Forum | |||
a DC motor controller ( electronic speed controller) | Golf Carts and Parts | |||
RXV controller not responding to upgrade handheld device to program controller | Electric EZGO | |||
Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car | |||
Trade 400 amp 36v Curtis controller for 500 amp or higher 48v controller | Golf Carts and Parts | |||
Did lift kit cause controller to die? What are controller options? 95 EZGO 25864G05 | Electric EZGO |