07 TXT 36v iTS with reverse only

scottyb · 04-29-2018, 02:18 PM

Yes, Now we can rule out the F&R too. You could have a bad cable. Swap the Cables at 3 and 9 now at the motor S1 and S2. This will complete the swap of the 3 & 9 cables. Take time to inspect the motor terminals for signs of heat or any looseness.

highspeedgraphix · 04-30-2018, 01:38 PM

Ill let you know my findings. When i installed batts prior visually they looked okay and tight. Jiggled them nothing seemed like about tp break..

Im hoping it's a wire....gonna order 4 48inch replacements making all power wires new 4 gauge.

Plan to upgrade just need to get want to get running...oh so close.....

Looks like pull a couple batteties is thr easiest way to access . Is it the lower or upper side motor poles i want to swap?

highspeedgraphix · 05-01-2018, 06:35 PM

Motor wasnt marked, but it believe i had a lose pole in the motor....after disconnecting uppers i noticed pole was ever so slightly loose, tightened, wire brushed the poles and eyelets, reconnected and she ran like a top!

FR switch is backwards no but ill fix when i swap the new lines. Now ready for some mods!

Thx scotty for the help

scottyb · 05-01-2018, 07:38 PM

We were getting down to that being the last possibility and I hoped you would find it swapping the motor cables. Good detective work.

04-29-2018, 02:18 PM	#11
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: 07 TXT 36v iTS with reverse only Yes, Now we can rule out the F&R too. You could have a bad cable. Swap the Cables at 3 and 9 now at the motor S1 and S2. This will complete the swap of the 3 & 9 cables. Take time to inspect the motor terminals for signs of heat or any looseness.

04-30-2018, 01:38 PM	#12
highspeedgraphix Not Yet Wild Join Date: Apr 2018 Posts: 39	Re: 07 TXT 36v iTS with reverse only Ill let you know my findings. When i installed batts prior visually they looked okay and tight. Jiggled them nothing seemed like about tp break.. Im hoping it's a wire....gonna order 4 48inch replacements making all power wires new 4 gauge. Plan to upgrade just need to get want to get running...oh so close..... Looks like pull a couple batteties is thr easiest way to access . Is it the lower or upper side motor poles i want to swap?

05-01-2018, 06:35 PM	#13
highspeedgraphix Not Yet Wild Join Date: Apr 2018 Posts: 39	Re: 07 TXT 36v iTS with reverse only Motor wasnt marked, but it believe i had a lose pole in the motor....after disconnecting uppers i noticed pole was ever so slightly loose, tightened, wire brushed the poles and eyelets, reconnected and she ran like a top! FR switch is backwards no but ill fix when i swap the new lines. Now ready for some mods! Thx scotty for the help

05-01-2018, 07:38 PM	#14
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: 07 TXT 36v iTS with reverse only We were getting down to that being the last possibility and I hoped you would find it swapping the motor cables. Good detective work.

Similar Threads
Thread	Forum
wiring a reverse light to the reverse buzzer?	Gas Yamaha
F/r switch help. Reverse buzzer is on in forward and not on reverse	Electric EZGO
1981 Harley 3 wheel D model reverse issue/won't reverse	Gas Harley Davidson
No reverse. HD forward reverse switch needed?	Electric Club Car
Reverse alarm stuck - motor won't run forward or reverse	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum