|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
11-28-2019, 10:54 AM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2019
Location: Fl
Posts: 3
|
Motor terminals ezgo 36 v motor
Old motor has terminals marked A1&A2 - S1&S2. New motor has terminals A1&A2 - F1&F2. Will it run?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-28-2019, 11:27 AM
|
#2 |
|
......................
 Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Motor terminals ezgo 36 v motor
You have a series drive system A1- S1. The motor with the A1-F1 is a Sepex drive system, two different systems/motors. No the new motor A1-F1 will not work
|
|
|
|
|
11-28-2019, 12:24 PM
|
#3 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Motor terminals ezgo 36 v motor
The exception being the early DCS motors which were marked with S terminals.
Which drive system is the cart? |
|
|
|
|
11-28-2019, 12:36 PM
|
#4 |
|
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Motor terminals ezgo 36 v motor
Yes I forgot about the DCS cart
 it's a whole different animal |
|
|
|
|
11-28-2019, 02:00 PM
|
#5 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Motor terminals ezgo 36 v motor
Quote:
 |
|
|
|
|
|
11-28-2019, 04:00 PM
|
#6 | |
|
Gone Wild
Join Date: May 2016
Location: Central Alabama
Posts: 1,048
|
Re: Motor terminals ezgo 36 v motor
Quote:
Post more specific info about your cart's drive system and these guys will point you in the right direction. What does your f/r switch look like and where is it located? |
|
|
|
|
|
11-28-2019, 04:23 PM
|
#7 |
|
Not Yet Wild
Join Date: Nov 2019
Location: Fl
Posts: 3
|
Re: Motor terminals ezgo 36 v motor
F/R on front of seat under legs.
|
|
|
|
|
11-28-2019, 05:15 PM
|
#8 | |
|
Gone Wild
Join Date: May 2016
Location: Central Alabama
Posts: 1,048
|
Re: Motor terminals ezgo 36 v motor
Quote:
http://www.buggiesgonewild.com/elect...en-system.html |
|
|
|
|
|
11-28-2019, 07:32 PM
|
#9 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Motor terminals ezgo 36 v motor
It is of interest to note the sepex motors Ezgo produced with the A and S terminals were the first sepex motors. The 1995 was the worlds first SEPEX cart.
It's a good one with a nice mix of torque and speed. The original controller had a fatal flaw but an Alltrax replacement fixes that. The only downfall remaining is the system's inability to limit rpm or generate any regenerative braking. |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Motor terminals a1 a2 s1 s2 on a series 48v ds | Electric Club Car | |||
| Unmarked PDS Motor terminals | Electric EZGO | |||
| motor terminals getting hot? | Electric Club Car | |||
| Motor terminals | Electric Club Car | |||
| Question about Motor Terminals | Electric Club Car | |||
Linear Mode
