11-19-2020, 09:20 PM | #1 |
Not Yet Wild
Join Date: Sep 2016
Location: Victoria, BC Canada
Posts: 38
|
Removing OBC plug
Deleted the OBC, going Navitas AC, just want to confirm the plugs are straight through connectors. My OBC has 6 wires coming out and the cart side only 5. Is it the same white and blue wires that need to be spliced together?
Also do I need the speed sensor wiring from the old motor for the AC motor or can those wires be clipped and deleted? 2005 Club Car Precedent 48v |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-19-2020, 11:52 PM | #2 |
MOD of all BS!
Join Date: Sep 2011
Location: Florida
Posts: 17,477
|
Re: Removing OBC plug
The White wire and the Blue wire on the Cart side harness (wiring) needs to be butt connected together.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Installed AC plug port in factory plug location | Electric Club Car | |||
G1 turns over without plug, barely with plug in | Gas Yamaha | |||
Charger plug and cart plug redo | Electric EZGO | |||
Stripped out oil plug drain plug | Gas Yamaha | |||
blinker light plug where to plug in | Electric Yamaha |