10-03-2011, 09:39 PM | #1 |
Not Yet Wild
Join Date: Oct 2011
Location: kansas
Posts: 33
|
85 ezgo
Purchased a 85 ezgo 36v resistor coil...the 1&2 micro switches on F&R controller have no wires and solenoid has no wires! Where could i get a good schematic for that wireing. Tks..first tread
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-03-2011, 11:40 PM | #2 |
Not Yet Wild
Join Date: Sep 2011
Posts: 36
|
Re: 85 ezgo
look at the stickys, ezgo resistor wiring diagram
|
10-04-2011, 10:09 AM | #3 |
Not Yet Wild
Join Date: Oct 2011
Location: kansas
Posts: 33
|
Re: 85 ezgo
Thanks kennyh99 i'll look that over. the old beater has promise if i can get it wired together!
|
10-04-2011, 10:21 AM | #4 |
Not Yet Wild
Join Date: Sep 2011
Posts: 36
|
Re: 85 ezgo
Yea I just completely rewired my 82, just do it likeit is on the diagram, it worked great for me
|
10-04-2011, 11:42 AM | #5 |
Not Yet Wild
Join Date: Oct 2011
Location: kansas
Posts: 33
|
Re: 85 ezgo
Tks again..i hope i have the same luck! I'll keep in touch!!
|
10-05-2011, 09:37 AM | #6 |
Not Yet Wild
Join Date: Oct 2011
Location: kansas
Posts: 33
|
Re: 85 ezgo
Kennyh99...no luck with diagrams. From what i see my wireing looks different than the stickys. Can i get a diagram for serial#36807...code 62685...Still working on it..tks ...2nd post
|
10-05-2011, 09:47 AM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: 85 ezgo
You may find slight variations but the carts were very close to the same throughout the 80s ...
This diagram covers 1983 - 1993 Resistor Coil carts. |
10-05-2011, 09:56 AM | #8 |
Not Yet Wild
Join Date: Oct 2011
Location: kansas
Posts: 33
|
Re: 85 ezgo
Tks scottie b...I'll keep pluggun.Any other help is appreciated....stuff
|
10-06-2011, 08:59 AM | #9 |
Not Yet Wild
Join Date: Oct 2011
Location: kansas
Posts: 33
|
Re: 85 ezgo
Scotty b...I wired it just like the diagram says and i can't get a thing. I can't even get the solenoid to click. "i check it with jumper cables "it clicked" so i know its good.I'm not getting voltage to the solenoid?? I had to put a new micro switch on it. Can a micro switch be bad even if it clicks? I've checked wires,connections,ect...i'm brain dead. Any response welcome.
|
10-06-2011, 07:40 PM | #10 |
Not Yet Wild
Join Date: Sep 2011
Posts: 36
|
Re: 85 ezgo
u need to get a meter and check the voltage, the power goes threw your micro switch on the f r switch, then threw your key, then your accelerator switch closes as soon as u press the accelerator down 20%, then it powers the solenoid after all the swutches are closed.
so make sure u have the key on, its on forward or reverse, and u have the pedal down. take your meter and check and see where the voltage stops. its stopping somewhere. |