|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-12-2011, 03:24 PM | #1 |
Not Yet Wild
Join Date: Jul 2008
Posts: 47
|
Increasing Speed on an 08 EZ-G0 w/ Series
I am looking at a few EZ-GO Carts with Series Motors. From what I understand, the series motors with on go approx 15 MPH. I have spoken with a few people and have basically been told that a a motor swap will not add a significant amount of speed. I don't understand this because this is clearly not the case with the Club Care Precedent.
i would like to get the cart up to about 24 MPH and would appreciate any input. Thx, Mark |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-12-2011, 04:39 PM | #2 |
Gone Wild
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: Increasing Speed on an 08 EZ-G0 w/ Series
i'm pretty sure all Precedents are sepex aka IQ in club car speak. They're all 48v I believe also.
Starting with a series cart in good condition with top notch batteries you can probably get in the 20-22 range with a rewound motor by Plum Quick (site sponsor) but you will need upgraded wires, F/R switch and probably controller to support it. Beyond that will require 48v conversion. Suggest you contact these people http://www.cartsunlimited.net/. It's what they do. |
11-12-2011, 04:48 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: Increasing Speed on an 08 EZ-G0 w/ Series
My series Ezgo is running 24 mph with a Alltrax SPM500 controller, 48 volts, 23" tires, & PQ motor.
|
11-12-2011, 05:01 PM | #4 |
Gone Wild
Join Date: Jul 2011
Location: Houston, TX
Posts: 2,901
|
Re: Increasing Speed on an 08 EZ-G0 w/ Series
A series cart is not the best platform if you are wanting speed. Speed means a PDS cart. With just a controller swap and hd solenoid you will be at 24mph. If you add heavy duty cables and a plum quick motor along with 48v you will be at about 35mph on a good day
|
11-12-2011, 09:29 PM | #5 |
Gone Wild
Join Date: Jan 2011
Location: Camino, CA.
Posts: 300
|
Re: Increasing Speed on an 08 EZ-G0 w/ Series
My 96 series cart does 24mph with 48v, 500A FSIP controller, Plum Quick motor and 18" tires. I could have gone faster by I needed to account that I live in the hills
|
11-12-2011, 09:43 PM | #6 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,005
|
Re: Increasing Speed on an 08 EZ-G0 w/ Series
My brothers 2003 36 volt series with a stock controller, 4 gauge wires, 23 inch tires and a PQ Bandit runs about 18-19.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
cc ds series cart 9 mph top speed | Electric Club Car | |||
Speed upgrade... non-dcs series | Electric EZGO | |||
Increasing speed on a 2009 Club Car | Electric Club Car | |||
2 speed series motor from EMP | Electric EZGO | |||
Increasing speed on a EZGo PDS TXT | Electric EZGO |