|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-22-2011, 11:16 AM | #1 |
Not Yet Wild
Join Date: Nov 2011
Posts: 45
|
96 EZGO Txt. Nothing happens
Hello to all. I have a 96 txt that takes charge, beep when you put in reverse but when you accelerate, nothing happens. I tried removing the resistor from the solenoid and jumping it but the cable sparks.
Any advise? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-22-2011, 01:17 PM | #2 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: 96 EZGO Txt. Nothing happens
PSM
Can we first determine your type of cart? Where is your fnr switch and is there a toggle switch on top of the controller box? |
11-22-2011, 01:28 PM | #3 |
Not Yet Wild
Join Date: Nov 2011
Posts: 45
|
Re: 96 EZGO Txt. Nothing happens
96 ezgo txt. FNR by knees and no switch.
|
11-22-2011, 01:34 PM | #4 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: 96 EZGO Txt. Nothing happens
Have you tried to measure the voltage across the solenoid? On one side you should be able to see pack voltage, on the other it will be less, when you depress the pedal that should activate the solenoid, your voltage should read close to pack voltage. Do you have a DVM?
|
11-22-2011, 01:35 PM | #5 |
Not Yet Wild
Join Date: Nov 2011
Posts: 45
|
Re: 96 EZGO Txt. Nothing happens
Here is picture.
|
11-22-2011, 01:37 PM | #6 |
Not Yet Wild
Join Date: Nov 2011
Posts: 45
|
Re: 96 EZGO Txt. Nothing happens
anyway to jump solenoid?
|
11-22-2011, 01:39 PM | #7 |
Not Yet Wild
Join Date: Oct 2011
Location: Ennis, tx
Posts: 68
|
Re: 96 EZGO Txt. Nothing happens
check the micro swith in the foot pedal(under the floor mat). if the resistor is bad it will usually burn that switch up. If its bad replace it and the resistor and see what you get.
|
11-22-2011, 01:42 PM | #8 | |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: 96 EZGO Txt. Nothing happens
Quote:
If you are referring to what happened to the cart you worked on I believe it was your diode, not the resistor. LH |
|
11-22-2011, 01:42 PM | #9 |
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: 96 EZGO Txt. Nothing happens
|
11-22-2011, 01:57 PM | #10 |
Not Yet Wild
Join Date: Nov 2011
Posts: 45
|
Re: 96 EZGO Txt. Nothing happens
anyway to bypass the microswitch? I dont want to start buying parts out of the blue.
|