All Reverse no Forward

[scottyb]

Originally Posted by sonnysmith

There is one other thing you need to look at.
The black and white wires run through a guide and are bad to rub the insulation off and short out the controller.
I have had this problem more than once.

Sonny

Agreed .
Everyone who works on their Ezgo TXT should look at this:

[jawbones]

Thanks I will double check!

[manwitaplan]

Originally Posted by scottyb

Agreed .
Everyone who works on their Ezgo TXT should look at this:

Do not want to hijack but what should you do to keep that from happening?

[yurtle]

I used wire loom, and wire ties. I made my own 2 AWG cables, and used wire loom anywhere it had a chance to rub anything.

[scottyb]

Originally Posted by manwitaplan

Do not want to hijack but what should you do to keep that from happening?

I use a 5-6 inch piece of rubber hose or plastic (irrigation) tube. Irrigation tube is tough but not so thick as hose, it's a better fit. Slit it so you can slip it on and zip tie it in place.

[manwitaplan]

Originally Posted by scottyb

I use a 5-6 inch piece of rubber hose or plastic (irrigation) tube. Irrigation tube is tough but not so thick as hose, it's a better fit. Slit it so you can slip it on and zip tie it in place.

Thank you so much. I will do this today. Just put new cables on.

You guys are very helpful


Manwitaplan

[scottyb]

It's our job to be helpful