|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-02-2013, 06:40 PM | #1 |
Not Yet Wild
Join Date: May 2013
Posts: 1
|
Key switch off, voltage coming out of both ends of solenoid
My EZ Go golf cart was recently in a flood but we got the motor cleaned out and it is running, originally we had forward and reverse but we changed out the microswitch on the speed controller and now it won't move in either direction. We have 36 volts coming out of each end of the solenoid with the key off. What should we do now, could the solenoid be bad? Before we changed the microswitch we only had one speed (slow).
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Voltage to the solenoid switch | Electric Club Car | |||
key switch help coming from obc | Electric Club Car | |||
Where is this voltage /ground coming from??? | Electric EZGO |