Reverse not working

mdaddyrabbit · 06-13-2014, 09:53 PM

My 1993 Marathon will not go when in reverse. It goes great forward but will not move backwards. Any ideas?

scottyb · 06-13-2014, 11:13 PM

Most likely the problem is in one of the micro switches = solenoid does not click in reverse.

Or in the F&R high amp contacts = solenoid clicks but cart goes in one direction only

06-13-2014, 11:18 PM

mdaddyrabbit · 06-15-2014, 01:41 PM

Or in the F&R high amp contacts = solenoid clicks but cart goes in one direction only.

It does click the one time when I press the petal but will not go in reverse. So what do I need to replace?

cgtech · 06-16-2014, 01:15 AM

F&r cam, board, or both.

danas. · 04-11-2020, 07:51 PM

I have a 2002 western golf cart, that uses ezgo txt electrical components. The reverse has stoped work. I put a meter on the controller. I connected the red connector to M and the other to B+. When I have the F/R switch in forward the cart moves and the meter starts at 0 then moves up the more I push on the peddle. When I put the cart in reverse the reverse back up buzzer sounds, the meter starts at 0 then when I push on the peddle the meter moves to 4.447 and that is all it does and the cart does not move. Is this a bad controller?

06-13-2014, 09:53 PM	#1
mdaddyrabbit Getting Wild Join Date: Sep 2013 Posts: 117	Reverse not working My 1993 Marathon will not go when in reverse. It goes great forward but will not move backwards. Any ideas?
mdaddyrabbit Getting Wild Join Date: Sep 2013 Posts: 117

06-13-2014, 11:13 PM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: Reverse not working Most likely the problem is in one of the micro switches = solenoid does not click in reverse. Or in the F&R high amp contacts = solenoid clicks but cart goes in one direction only

06-13-2014, 11:18 PM	#3
crash test dummy Guest Posts: n/a	Re: Reverse not working Last edited by crash test dummy; 06-13-2014 at 11:19 PM.. Reason: scotty types faster
crash test dummy Guest Posts: n/a

06-15-2014, 01:41 PM	#4
mdaddyrabbit Getting Wild Join Date: Sep 2013 Posts: 117	Re: Reverse not working Or in the F&R high amp contacts = solenoid clicks but cart goes in one direction only. It does click the one time when I press the petal but will not go in reverse. So what do I need to replace?
mdaddyrabbit Getting Wild Join Date: Sep 2013 Posts: 117

06-16-2014, 01:15 AM	#5
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: Reverse not working F&r cam, board, or both.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-11-2020, 07:51 PM	#6
danas. Not Yet Wild Join Date: May 2019 Location: Green Valley, Arizona Posts: 25	Re: Reverse not working I have a 2002 western golf cart, that uses ezgo txt electrical components. The reverse has stoped work. I put a meter on the controller. I connected the red connector to M and the other to B+. When I have the F/R switch in forward the cart moves and the meter starts at 0 then moves up the more I push on the peddle. When I put the cart in reverse the reverse back up buzzer sounds, the meter starts at 0 then when I push on the peddle the meter moves to 4.447 and that is all it does and the cart does not move. Is this a bad controller?

Similar Threads
Thread	Forum
Reverse Not Working after F&R Replaced	Electric EZGO
Reverse Not Working!!	Electric Club Car
Reverse not working	Gas Yamaha
Reverse not working exactly right on my 1999 Ez Go	Electric EZGO
Reverse Buzzer Not Working	Electric EZGO