|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-21-2021, 08:42 PM
|
#1 |
|
Gone Wild
Join Date: Apr 2019
Location: Baton Rouge, LA
Posts: 204
|
2016 G29 Rebuild
looking at replacing my motor, controller, and batteries in 2016 Yamaha G29/ Drive...
What are some of the component configurations you guys have done in the past? My cart has 6" lift with 23" tires and used 98% of the time on flat neighborhood roads but i would like to add some torque and maybe go from factory 15mph to 20. Anything over 20 and she gets a little out of hand. I do have a set of 1.5" spacers coming that will hopefully help stabilize a little. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-21-2021, 09:42 PM
|
#2 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,183
|
Re: 2016 G29 Rebuild
With large tires, I would go with a high torque motor. I have had good luck with D&D - and they have a good high torque motor. I have a D&D ES24-14 in my 2012 cart with high speed gears. I like Alltrax controllers. Lithium is the way to go IMO. Others have had good experience with AC drives - but I have no experience with them in carts. Worth looking into though.
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2016 txt | Gas EZGO | |||
| 2016 rxv | Electric EZGO | |||
| 2016 RXV value | Gas EZGO | |||
| 2016 RXV gas in oil | Gas EZGO | |||
| “New” 2016 G29 EFI | Gas Yamaha | |||
Linear Mode
