|
07-29-2021, 06:37 AM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2021
Posts: 9
|
97 carryall lift kit
Hello all
My question is I am working on a 97 carryall and I would like to put a 6 inch lift kit on it. But most of the lift kits online say they will not fit carryalls. From what I have researched a carryall is just a stretched standard DS. I’m guessing most of the problem is because they have four wheel drum brakes. If I change the front hubs two standard DS steel capped hubs and modify the rear brakes I should be able to use a standard DS lift kit? Any input would be great. Thanks Ellis |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-29-2021, 06:51 AM
|
#2 |
|
Not Yet Wild
Join Date: Feb 2021
Posts: 9
|
Re: 97 carryall lift kit
It is currently a low rider. The front leaf springs are flipped over and 2 inch lowering blocks in the rear and I’m getting tired of only being able to drive on the pavement.
|
|
|
|
|
09-07-2021, 10:57 AM
|
#3 |
|
Not Yet Wild
Join Date: Jan 2021
Location: California
Posts: 2
|
Re: 97 carryall lift kit
You can go with a Jake's Club Car DS / Carryall Long Travel Kit W/ Mech Brakes (Fits 1992-Up) or a Jake's 6 Inch Spindle Lift Kit W| Mech Brakes - 1981-+Up Club Car DS | Carryall depending on budget and availability
|
|
|
|
|
09-16-2021, 01:39 PM
|
#4 |
|
Not Yet Wild
Join Date: Feb 2021
Posts: 9
|
Re: 97 carryall lift kit
I appreciate the info. I just purchased the a arm lift kit for a DS and it bolted right on. I just remove the front brakes.
Thanks |
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| '94 carryall lift kit | Gas Club Car | |||
| carryall lift | Garage and Workshop | |||
| Wtb carryall lift kit | Golf Carts and Parts | |||
| Carryall ll lift | Lifted Golf Carts | |||
| carryall lift | Gas Club Car | |||
Linear Mode
