|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-01-2018, 12:43 PM | #1 |
Not Yet Wild
Join Date: Jul 2016
Posts: 67
|
G2 axle removal
Are there any c-clips or pins inside the pinion housing that I need to remove before I can slide the axles out of the housing?
I'm trying to replace the brake assemblies, but cant take them off with the axles in place. I thought I read that the axles are just held on by the flange that holds the brakes. I removed that flange, and the axles wont budge. Am I missing something? Thanks Shawn Sent from my SM-G965U using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-01-2018, 03:16 PM | #2 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: G2 axle removal
If you removed the 4 bolts behind the brake shoes, then yes the axle should slide out. If not, put your brake drum on backwards, put the lug nuts on just a few turns so the brake drum is loose on the studs. Now use the brake drum as a slide hammer and yank on the brake drum until the axle comes out
|
11-01-2018, 04:10 PM | #3 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: G2 axle removal
I just hit the axle flange with a dead blow hammer.
|
11-01-2018, 04:27 PM | #4 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: G2 axle removal
|
11-01-2018, 04:35 PM | #5 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: G2 axle removal
OUCH
|
11-01-2018, 05:03 PM | #6 |
Not Yet Wild
Join Date: Jul 2016
Posts: 67
|
Re: G2 axle removal
I tapped it but it didnt move. Should the bearing stay in the axle tube or slide out with the axle?
I'll tap a little harder... Sent from my SM-G965U using Tapatalk |
11-01-2018, 05:09 PM | #7 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: G2 axle removal
The bearing will stay with the axle.
|
11-01-2018, 05:27 PM | #8 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: G2 axle removal
|
11-01-2018, 05:42 PM | #9 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: G2 axle removal
Hit it on the top of the flange, and the bottom. It will come out. Some can be hard. A slide hammer works great too
|
11-01-2018, 07:13 PM | #10 |
Not Yet Wild
Join Date: Jul 2016
Posts: 67
|
Re: G2 axle removal
Got it out.
Thanks for the info. Sent from my SM-G965U using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
CC DS Axle removal | Electric Club Car | |||
Rear axle removal on a g8 | Electric Yamaha | |||
boke needs txt axle removal help | Electric EZGO | |||
axle removal | Gas EZGO | |||
rear axle removal | Electric golf carts |