|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-27-2021, 09:26 AM | #1 |
Gone Wild
Join Date: Mar 2016
Posts: 265
|
Letrika AMT7120 motor for EZGO RXV
Anyone have one they are not using? My motor makes an awful noise when moving. Sounds like fingernails on a chalkboard.
Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-27-2021, 12:22 PM | #2 |
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 1,999
|
Re: Letrika AMT7120 motor for EZGO RXV
As i've read on here, the induction motor probably last forever... not many parts in it that can cause such a noise?
|
07-27-2021, 12:43 PM | #3 |
Gone Wild
Join Date: Mar 2016
Posts: 265
|
Re: Letrika AMT7120 motor for EZGO RXV
What if this was a beach cart and the motor got submerged?
With the electric brake off the motor, when I roll the cart it had a slight grinding noise which picks up in volume the faster the cart goes. Sent from my iPhone using Tapatalk |
07-27-2021, 01:02 PM | #4 |
Gone Wild
Join Date: Sep 2020
Location: Germany
Posts: 1,999
|
Re: Letrika AMT7120 motor for EZGO RXV
Are you sure it's coming from the motor, not from transaxle? Probably motor bearing?
|
07-27-2021, 01:21 PM | #5 |
Gone Wild
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: Letrika AMT7120 motor for EZGO RXV
If salt water its probably toast along with the carts wiring harness, controller and all the sensors.
|
07-27-2021, 03:18 PM | #6 | |
Gone Wild
Join Date: Mar 2016
Posts: 265
|
Re: Letrika AMT7120 motor for EZGO RXV
Quote:
I’m not sure of anything at this point. But will put the rear up in the air and listen once I get it moving better. Sound lessens once cart reaches speed. But getting up to speed and coming to a stop, its the loudest. Sent from my iPhone using Tapatalk |
|
07-27-2021, 03:22 PM | #7 | |
Gone Wild
Join Date: Mar 2016
Posts: 265
|
Re: Letrika AMT7120 motor for EZGO RXV
Quote:
I could be wrong. It has a Mexico Beach permit on the rear bumper under the back seat. Mexico Beach got hit in 2018. Looking at the cart I don’t really see any signs of saltwater intrusion around the pedals, controller, springs, or axle. Its actually very clean for a 2013. Just thinking out loud. Sent from my iPhone using Tapatalk |
|
07-29-2021, 10:03 AM | #8 |
Gone Wild
Join Date: Mar 2016
Posts: 265
|
Re: Letrika AMT7120 motor for EZGO RXV
Found this motor online but it says it for a 2016 and newer RXV. Other websites say 2008 and newer on RXVs.
Will this not work on a 2013? https://www.countrycat.com/parts-acc...16-2021-models Sent from my iPhone using Tapatalk |
07-29-2021, 10:14 AM | #9 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: Letrika AMT7120 motor for EZGO RXV
Check this link out.
https://shop.txtsv.com/vehicle/index...TOR_REVISION/y |
07-29-2021, 12:08 PM | #10 | |
Gone Wild
Join Date: Mar 2016
Posts: 265
|
Re: Letrika AMT7120 motor for EZGO RXV
Quote:
Ready to put some miles on this cart. Cart runs 22mph, so they have done some work on the controller. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Encoder steps on Iskra AC motor AMT7120 48v motor | Electric EZGO | |||
Motor terminals ezgo 36 v motor | Electric EZGO | |||
Yamaha G16 Motor Coupling Squealing, Will my old EZGO motor work? | Electric Yamaha | |||
Help with an old ezgo motor (6 wire motor) | Electric EZGO | |||
EZGO Workhorse 6 PASSENGER limo Setup for Briggs,Honda or Ezgo Motor | Golf Carts and Parts |