no power, what should i check?

sinfulrelations · 02-26-2014, 09:50 AM

so im looking at making my own intake tube and filter, i have a spectre universal cone filter laying in a box, it has a 3 in inlet, and the outlet on the carb is 2.5, shouldnt be too hard to rig up to work, what yall think? my stock intake tube is shot, flaking apart from the inside and bout to break through.

sinfulrelations · 02-26-2014, 10:24 AM

When I go to replace the carb is there anything I can do to get a little more top end?

Sent from my LG-E980 using Tapatalk

02-26-2014, 09:50 AM	#31
sinfulrelations Not Yet Wild Join Date: Feb 2014 Location: Sturgis, Michigan Posts: 62	Re: no power, what should i check? so im looking at making my own intake tube and filter, i have a spectre universal cone filter laying in a box, it has a 3 in inlet, and the outlet on the carb is 2.5, shouldnt be too hard to rig up to work, what yall think? my stock intake tube is shot, flaking apart from the inside and bout to break through.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Check it and double check it. Multimeter failure.	Electric EZGO
2005 Precedent starts of powered, then loses power, reverse always power	Electric Club Car
Power Wise Charger worked after board replaced now back to no power	Electric EZGO
how do i check my motor for power	Electric EZGO
G9 check fuel pump check valve?	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-26-2014, 10:24 AM	#32
sinfulrelations Not Yet Wild Join Date: Feb 2014 Location: Sturgis, Michigan Posts: 62	When I go to replace the carb is there anything I can do to get a little more top end? Sent from my LG-E980 using Tapatalk