lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Tomberlin


Post New Thread  Reply
 
Thread Tools Display Modes
Old 01-06-2020, 08:32 AM   #1
kantuckian
Gone Wild
 
Join Date: Dec 2010
Posts: 614
Default Hall Effect sensor

Anyone tell me how to wire around the Hall effect sensor on the accerlator on a Tomberlin Emerge elect Thanks
kantuckian is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 01-06-2020, 09:32 AM   #2
jeremy98
Not Yet Wild
 
jeremy98's Avatar
 
Join Date: May 2017
Location: Carlisle, PA
Posts: 47
Default Re: Hall Effect sensor

I dont believe that there is a way. If memory serves, Tomberlin uses a 48v direct input to its throttle which has a circuit board in it. This board splits the voltage and sends 15v to the "hall effect/ ITS" and 48v to the microswitch (i think). Normally an ITS output is anywhere between .5v to 2.5v depending on where the throttle is. This same circuit board then changes that ITS signal and converts it to a 0-5v signal that the control can read. Hope this helps.
jeremy98 is offline   Reply With Quote
Old 01-07-2020, 10:19 AM   #3
Golf cart guy
Gone Wild
 
Golf cart guy's Avatar
 
Join Date: May 2015
Location: Central Florida
Posts: 2,022
Default Re: Hall Effect sensor

If you have a tomberlin that has the circuit board, you can convert it over to the new style hall effect sensor that does not use the circuit board. All you have to do is swap the 2 outside wires on the plug in to the sensor. Its simple to do.
Golf cart guy is offline   Reply With Quote
Old 01-07-2020, 05:07 PM   #4
kantuckian
Gone Wild
 
Join Date: Dec 2010
Posts: 614
Default Re: Hall Effect sensor

Thanks Thats what Have
kantuckian is offline   Reply With Quote
Old 02-22-2020, 04:56 PM   #5
Cbrummer
Not Yet Wild
Tomberlin
 
Join Date: Feb 2020
Location: Granbury TX
Posts: 1
Default Re: Hall Effect sensor

I am changing the Hall Effect on my 2010 Emerge. Which wires go where? Converting from circuit board to new style. Thanks in advance.
Cbrummer is offline   Reply With Quote
Old 02-22-2020, 05:11 PM   #6
Golf cart guy
Gone Wild
 
Golf cart guy's Avatar
 
Join Date: May 2015
Location: Central Florida
Posts: 2,022
Default Re: Hall Effect sensor

swap the 2 outside wires
Golf cart guy is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Tomberlin


Thread Tools
Display Modes


Similar Threads
Thread Forum
Precharger and Shunt or Hall Sensor Help All things Lithium
Hall effect sensor Tomberlin
06 Tomberlin Emerge Hall Effect Sensor Tomberlin


All times are GMT -5. The time now is 05:25 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.